My TPA3116D2 design (opinions please) - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th November 2013, 11:26 AM   #1
diyAudio Member
 
Join Date: Oct 2013
Default My TPA3116D2 design (opinions please)

ok so i feel like a little bit of an idiot because i didn't read all the of thread for this amp that's been sitting at the top of the list... only read about half of it... and then noticed somebody else had already made a pcb for it. Either way.... i enjoy making things and i figured before i order the pcbs for $15/p i'd get advice on if my design is complete crap or not. I've done a bit of design and testing of boards before but i have NOT done an amplifier for audio... only extremely low voltage precision instrument amplifier circuits. i will include the eagle files and a short BOM and any suggestions or opinions would be appreciated

the idea behind this amp was class-d, high fidelity, small... <- in that order. so once i picked the amp chips that gave me the power that i wanted for a 2.1 setup of 2x 2way bookshelf speakers and an 8"-10" sub... i began picking components. after some research. Wima seemed to win out on the decent price and high quality category of film caps. while i wanted the pp caps for input... the size was killing me... and the reviews said there wasn't much of a difference between them and the polyester on the inputs... so i took the fidelity hit. (if it will be much more of a hit that a little please lemme know) I did the voltage to the best of my abilities on the outputs since i havn't dealt with high power circuits before. the amp doesn't output higher than 20v (from what the pdf claims)

2x TPA3116D2
22x pin headers
3x 505-MKS21/50/10 Wima Film Cap. 50v 1uF 10%
6x 710-7447452100 Wurth 10 uh 1kHz 4.7A
6x FCN1210A103J-G3 Cornell Film Capacitor .01UF 100V 5%
6x 667-ECH-U1H102JX5 film cap.1000pf 50v 5%
4x 505-MKS2.68/63/10 Wima Film Cap. 63V .68uF 10%
2x 505-MKS21/100/5 Wima Film Cap. 100V 1uF 5%
8x 505-MKP20.22/100/5 Wima Film Cap. 100V .22uF 5%
4x 647-UVR1V471MPD Nichicon Electrolytic Cap. 35V 470uF 20%

I didn't list any of the tiny power smoothing caps (which i figured i'd just go with whatever would fit in the 0805 size) or the gain setting cap. resistors aren't listed (i'm assuming all being 1/4w and standard low tolerance decent resistors is fine... i am however curious about the resistors in the EMI section of the circuit... i feel like 3.3 ohm at 1/4 might not be the proper rated resistor in the wattage category.

this circuit is almost entirely based on the one in the pdf for a workable circuit... i intend to add a volume control and adjust the gains to get the balance between the stereo speakers and sub close... so i don't have to adjust volume between them by much... This setup will be fed by an output from a usb dac that gives me Left, Right, and Sub outputs.

i'm aware that some of the components seem REALLY close together... example being the output capacitors... they are slightly smaller than the actual footprint since i couldn't find the proper footprint in eagle. and these will be the heatsinks for the amp chips... which i intend to put a tiny little fan in the case ^_^ http://ecx.images-amazon.com/images/...L._SL1100_.jpg
Attached Files
File Type: zip class_d_amp_tpa3116d2.zip (82.7 KB, 62 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
TPA3116D2 Amp mguntrum Class D 4692 Yesterday 10:27 PM
TPA3116D2 lowest THD+N kinku Class D 23 3rd November 2013 04:02 AM
looking for opinions on amp design. armstrom Solid State 1 27th June 2008 08:11 PM
like some opinions on this design scottericsonon Multi-Way 9 3rd July 2007 09:56 PM
ht design opinions ucla88 Multi-Way 12 4th January 2002 04:58 AM


New To Site? Need Help?

All times are GMT. The time now is 03:37 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2