amplifier going out with a pop. Bad ground? - diyAudio
Go Back   Home > Forums > Amplifiers > Class D
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th January 2013, 10:34 PM   #1
diyAudio Member
Join Date: Jan 2013
Default amplifier going out with a pop. Bad ground?

i have two jl amplifiers. One xd 400/4 and one slash 100/1. Both on the same ground on chassis. Now the slash goes out randomly with a loud pop! Noise. Is this because i put them on one ground. Note:slash is the one farthest grounded to the point. Do i need to make different grounds to prevent protection mode?
  Reply With Quote
Old 16th January 2013, 08:20 PM   #2
diyAudio Member
nigelwright7557's Avatar
Join Date: Apr 2008
Location: Carlisle, England
I had trouble with a 2092 based amp popping, screeching and sometimes a siren type sound on power off.
It turned out it was due to having too much smoothing on the power supply.
I cured it with a small PIC monitoring the power supply and resetting the 2092 if the VCC voltage got too low.
Murton-Pike Systems PCBCAD51 pcb design software.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amplifier making pop sound comasus Solid State 20 19th October 2011 05:48 PM
Very Bad Ground Noise - No Music kdhorne73 Car Audio 9 4th August 2008 07:48 PM
Digital Woes (Elite DV-45A ground loop and bad sound) pjpoes Digital Source 0 7th March 2005 07:32 PM
Bad ground = radio, but why? officeboy Parts 5 4th June 2004 10:25 PM
how do you check to see if your ground is bad inside of your amp? flakdogg Solid State 0 22nd March 2004 03:23 PM

New To Site? Need Help?

All times are GMT. The time now is 11:20 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2