diyAudio (
-   Class D (
-   -   Powersoft K8 (

ultra 10th November 2012 08:38 AM

Powersoft K8
1 Attachment(s)
Hi all.
A Powersoft K8 came in for repair due to water damage.
Upon repairing a track on the underside of the pcb, i also found
a bad voltage regulator.
Unfortunately it is cracked open and i am not able to see which one is it.
I am referring to U4 in the power amplifier section.
Here is a pic that might help.

gatabil 11th November 2012 04:53 PM

any have a service manual ?????

tomi 12th November 2012 09:17 PM

You'll probably have thought of this, but is there an identical regulator doing the same job on the other channel?
I suppose looking at the voltage ratings of connected caps on the output would give you a ballpark idea of the o/p voltage.

I understand that powersoft are a bit cagey with their service data, unfortunately.

DjLeco 13th November 2012 12:43 AM

U4 is LM7915, 15 volts negative regulator.

ultra 14th November 2012 12:24 AM

1 Attachment(s)
Thank you.

I think i came to the same conclusion myself.

There are only multilayer capacitors in the input and output of the regulator.

I only knew for sure it was a negative type.

Thanks again.

DjLeco 14th November 2012 01:18 AM

Can you please make for me some GOOD QUALITY pictures of entire amplifier, divided in sections, from UP, so I can observe better what they do there?

Interesed to see inductor coils, output filters, storage capacitors, etc

Please sent on my email:

Thank you and good luck in repair!

gatabil 18th November 2012 04:48 PM

hi. if interested!!!

powersoft digam schematic d7000 link is...
Salida Digan 7000

Rudi76kediri 27th April 2014 07:34 AM

hi all..!!

any have schematic powersoft 5000/7000..?
i have trouble with this device.

thank's for all member..!
please send for file to my mail.

adishor_2005 13th November 2014 12:16 PM

1 Attachment(s)
hello do you still have this powersoft amplifier? i have a problem with mine there are 2 blown zener diode and i cand't see the value, the position of the diodes in the board it's marked on the picture...

rivulet 5th November 2015 05:04 PM

Powersoft Digam 5000-7000

any have schematic powersoft 5000/7000..?

thanks a lot:):):)


All times are GMT. The time now is 03:49 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio