diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   Hypex UCD3xMP (http://www.diyaudio.com/forums/class-d/219701-hypex-ucd3xmp.html)

ds23man 14th September 2012 07:38 AM

Hypex UCD3xMP
 
News!!!!!!!!

UcD3xMP

troystg 14th September 2012 07:51 AM

2-6 channels @ 30w.... Sounds like an active speaker project. :-)

ds23man 14th September 2012 07:54 AM

And very, very cheap!

70 euro 2channel, 103 euro 6 channel ex. taxes!!!!!!!!!!!!!!!!

cotdt 14th September 2012 07:59 AM

It's very small too. Too bad buying from hypex requires a bank transfer, shipping, and shipping taxes. I wish there was a USA distributor so I don't have to deal with the headache.

4real 17th September 2012 08:43 AM

Looks nice. I see that the UcD32OEM module requires a buffer and is single ended. I see the Ucd3XMP having balanced inputs. Does this mean that it has a buffer on board? If so: what is it made of?

ds23man 17th September 2012 04:42 PM

There must be a buffer onboard!

4real 17th September 2012 06:07 PM

Might be, but is doesn't say so in the manual, and nothing of the sort can be seen on the picstures, though they are very bad and low-res, so that doesn't mean anything..

4real 20th September 2012 10:09 AM

I asked Hypex: a buffer is still needed, so the UcD3xMP does not contain a buffer. Also, new versions of the UcD32 OEM has balanced input now.

troystg 20th September 2012 10:31 AM

Just a guess but I would expect some differences between the UcD3xMP and the UcD32OEM. In the past Bruno left out the input buffer on the OEM designs so 3rd party manufacturers could roll their own. If the UcD3xMP is a DIY / consumer product it most likely has all required parts.

4real 20th September 2012 10:33 AM

Wel.. hypex sais it does not..


All times are GMT. The time now is 01:35 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2