diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   single ended ucd with gain of 1 (http://www.diyaudio.com/forums/class-d/219679-single-ended-ucd-gain-1-a.html)

switchleg 13th September 2012 10:54 PM

single ended ucd with gain of 1
 
I have been doing a bunch simulations. The best thd and dc off results seem to come from running it from a discrete class a input single ended where all the gain is from the class a amp and having a gain of 1 in the class d stage. Schematics being the same as running it from a balance input with a gain of 4.5 in the balanced differential stage and 4 in the class d stage.... anyone ever tried this on a board?

Bigun 15th September 2012 02:54 AM

sounds interesting - I think the combination of a class A gain stage feeding a class D buffer is a very attractive idea. What does your Class D buffer look like ?

switchleg 15th September 2012 10:13 AM

1 Attachment(s)
as you can see the feedback network is very standard other then the input is using a darlington pair. even with a standard input i seem to get best results with it being ran single ended with using the ucd as a buffer only (due to what seems to be less change in modulation frequency)... though im not sure how it will stack up in the real world.

I also have another design that pspice simulations show that will help resolve thermal drift and keep the comparator balanced... still yet to see it online anywhere so i am about a couple hours from throwing the board through the acid to find out :)

btw i only use irf530n for simulating as its difficult to find models for any decent new FETS.


All times are GMT. The time now is 09:28 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2