diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   SI8244 / IRFB4019 (http://www.diyaudio.com/forums/class-d/216470-si8244-irfb4019.html)

aligina 19th July 2012 10:46 AM

SI8244 / IRFB4019
 
Hey there,

I'm going to build a simple class D with SI8244 as driver and IRFB4019 half bridge. Max. +-60V.
As far as I can see, it should work without gate resistors..?

odnaizutra 19th July 2012 03:24 PM

If i were you iŽd use a small value resistor to soft the edge of positive going of vgs .This way you reduce emi.

stoc005 20th July 2012 06:43 PM

Sure. You can go without gate resistors. But, a SMPS we designed failed EMI/RFI without 10 ohm gate resistors. Your choice.


All times are GMT. The time now is 12:42 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2