Help needed with building the Kef'inator - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th July 2012, 07:45 PM   #1
pixate is offline pixate  United Kingdom
diyAudio Member
 
Join Date: May 2012
Default Help needed with building tripath powered kef uni-q driver, 12v boombox

I've got a project i'm trying to put together for a high end 12volt boom box.

The components I have so far are -

- a pair of Kef Q Compacts
Click the image to open in full size.

- SMSL Tripath amp (TA2021 amp)
Click the image to open in full size.

I've got the system running as is, and it performs well, but I would like to integrate into a single cabinet and if possible reduce the overall volume of the enclosure.

The design idea I have is to use passive radiators rather than ported box, and to place each driver in a sealed unit within the main box with apposing radiators for each driver. Does anyone have any experience with this sort of construction? What gain can be made in box volume using passive radiators?

Cosmetically I'm going to try and retain the look of the kef speakers, potentially using the existing speaker surrounds.

I'm also looking to try an improve the input gain, as my primary source is a android phone or mp3 player. I get good gain from a laptop but the volume is lower when connected to a phone. Is there a sensible way to adjust this without attacking the tripath amp too much?

Last question... I would like to add a battery, but am not sure of the simplist way to add charger facilities, and help with this circuit would be appreciated.

Thanks

Matt

Last edited by pixate; 26th July 2012 at 09:40 PM. Reason: better title
  Reply With Quote
Old 26th July 2012, 09:19 PM   #2
pixate is offline pixate  United Kingdom
diyAudio Member
 
Join Date: May 2012
Not getting much interest in this so far, so I will do a little update. I've managed to salvage a 12v 7.2Ah sealed lead battery from a small UPS, which is a bit bigger/heaver than planned, but guess it will be a good source for plenty of hours playback.

I'm beginning to go off the idea of passive radiators, and instead going to try and replicate the volume of the original speakers, and re-use the original ports.

My design is heading towards a long thin enclosure with sealed ends for each driver with a space for battery and amp in the middle. I'm still trying to find a solution for charging, and running some sort of pre-amp to up the input gain from portable mp3 players/mobile phones. Anyone know a good option for this? I've searched so many posts here and not got very far.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help needed building a DAC atupi Digital Line Level 0 28th June 2012 06:01 PM
Help needed to start F3 building laama86 Pass Labs 2 26th November 2010 12:15 PM
Help needed building loudspeakers sogens Multi-Way 6 5th October 2007 07:11 AM
help needed building a new brigde rectifier.... max29 Parts 1 26th November 2005 01:45 PM
Help needed building a sub... gerbruggeman Subwoofers 10 3rd October 2003 01:43 PM


New To Site? Need Help?

All times are GMT. The time now is 06:33 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2