diyAudio (
-   Class D (
-   -   Tk2050 with sure rotary volume board (

meska 9th April 2012 10:21 PM

Tk2050 with sure rotary volume board
Hello all,

I hope this isn't one of those questions that has been answered many times but I can't find an answer anywhere.

I bought the sure electronics tk2050 2x100 watt class d amp

2 Channel 100Watt Class D Audio Amplifier Board - TK2050 | eBay

And then I bought the rotary decoder volume board to go with it as they sell it as compatable with the tk2050 amp.

Rotary Encoder+Volume Control Board for TK2050 &TDA7492 | eBay

But when they arrived it doesn't fit as shown in schematic. I believe this is because the amp has been updated possibly as I found this one that follows the schematic but is advertised as the same thing.

2x100W @ 4 Ohm TK2050 Class-D Audio Amplifier Board 320-300

My question is could someone please help me by explaining how I wire the rotary decoder board to the amp I own. I can solder but I'm not a pcb expert. Can it be done?

If someone could help me I would be really grateful. My project is near complete now and this is one of the last obsticals. I have contacted sure electronics but it's been over a week and stil no reply

kc7wdg 10th April 2012 03:58 PM

You picked the wrong model of amp that is not compatible.

meska 10th April 2012 06:52 PM

Bollox. Could you please send me a link to the correct one? Thank you

All times are GMT. The time now is 07:53 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2