unsuccessful t-amp mod....please help

amiti · 1st August 2011, 11:47 PM

I tried to mod my SI t-amp. I replaced C10 capacitor and followed the stealth mod from here only without exchanging the volume pot. The process was very tedious with a few soldering problems. Eventually I thought I managed to set everything as instructed but when I hooked the power again some ticking started and went on constantly. These clicks are heard from both channels and in speed of a click every half a second more or less. Does anyone have a clue for what may be causing this?

nigelwright7557 · 2nd August 2011, 10:45 PM

The clicking is the amp has gone into protect mode.
Reason could be overcurrent detected.

amiti · 2nd August 2011, 11:21 PM

Thank you Nigel.This means the power circuit was shorted?

1st August 2011, 11:47 PM	#1
amiti diyAudio Member Join Date: Jul 2010	unsuccessful t-amp mod....please help I tried to mod my SI t-amp. I replaced C10 capacitor and followed the stealth mod from here only without exchanging the volume pot. The process was very tedious with a few soldering problems. Eventually I thought I managed to set everything as instructed but when I hooked the power again some ticking started and went on constantly. These clicks are heard from both channels and in speed of a click every half a second more or less. Does anyone have a clue for what may be causing this?

2nd August 2011, 10:45 PM	#2
nigelwright7557 diyAudio Member Join Date: Apr 2008 Location: Carlisle, England	The clicking is the amp has gone into protect mode. Reason could be overcurrent detected. __________________ http://www.murtonpikesystems.co.uk PCBCAD40 pcb design software.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T-amp POWER AMP Mod + VERY LOUD	ramdog12345	Class D	7	25th April 2007 12:00 PM
mod a L&R sum output to stereo signal?	compact7	Subwoofers	0	3rd April 2006 03:28 AM
B&W 801 matrix series 2 crossover mod help	musicalmaniac	Multi-Way	0	10th January 2005 12:17 AM
amp mod	vlljpior	Tubes / Valves	3	28th October 2004 03:34 PM
class H chip kit,unsuccessful	mikee12345	Chip Amps	4	26th February 2004 08:21 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd August 2011, 11:21 PM	#3
amiti diyAudio Member Join Date: Jul 2010	Thank you Nigel.This means the power circuit was shorted?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)