diyAudio (
-   Class D (
-   -   unsuccessful t-amp mod....please help (

amiti 1st August 2011 11:47 PM

unsuccessful t-amp mod....please help
I tried to mod my SI t-amp. I replaced C10 capacitor and followed the stealth mod from here only without exchanging the volume pot. The process was very tedious with a few soldering problems. Eventually I thought I managed to set everything as instructed but when I hooked the power again some ticking started and went on constantly. These clicks are heard from both channels and in speed of a click every half a second more or less. Does anyone have a clue for what may be causing this?

nigelwright7557 2nd August 2011 10:45 PM

The clicking is the amp has gone into protect mode.
Reason could be overcurrent detected.

amiti 2nd August 2011 11:21 PM

Thank you Nigel.This means the power circuit was shorted?

All times are GMT. The time now is 08:02 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2