Hypex Ncore - Page 420 - diyAudio
Go Back   Home > Forums > Amplifiers > Class D
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Closed Thread
 
Thread Tools Search this Thread
Old 26th May 2012, 10:31 PM   #4191
diyAudio Member
 
Join Date: Mar 2010
Quote:
Originally Posted by ufokillerz View Post
i bought a few of these
Aluminium Chassis for audio DIY (pre amp, headphone amp, DAC, etc.) | eBay a month ago, and finally got them, the height is just perfect, have maybe 2mm of clearance from the top heatsink on the smps600 with the spacers still attached to the bottom of the board. Just enough space inside for everything i need.

Don't forget that you'll need some 0.5mm or thicker insulation material with that low a clearance, to stay on the safe side of DIY
 
Old 26th May 2012, 11:14 PM   #4192
diyAudio Member
 
Join Date: Jan 2007
Quote:
Originally Posted by BuissonVert View Post
Don't forget that you'll need some 0.5mm or thicker insulation material with that low a clearance, to stay on the safe side of DIY
Yes, and that electrical insulator is usually a good thermal insulator, so consider the loss of that heatsinking...
 
Old 27th May 2012, 06:24 AM   #4193
diyAudio Member
 
Join Date: Apr 2004
Location: New York
Quote:
Originally Posted by BuissonVert View Post
Don't forget that you'll need some 0.5mm or thicker insulation material with that low a clearance, to stay on the safe side of DIY
The only thing that gets close is the heatsink on top of the smps600, i'll probably put some kapton tape on the chasis part that gets closest to the heatsink. there is full clearance on the bottom, the original spacers are attached.
 
Old 27th May 2012, 06:46 AM   #4194
diyAudio Member
 
Join Date: Apr 2004
Location: New York
http://i150.photobucket.com/albums/s...G_1033copy.jpg

This is how it looks in the ebay case, some space to play around with, height is perfect as mentioned.

cant get the image to show properly, so click on link!

Last edited by ufokillerz; 27th May 2012 at 06:55 AM.
 
Old 27th May 2012, 08:15 AM   #4195
diyAudio Member
 
Join Date: Dec 2011
mine are coming tomorrow. any sugetions for the internal wiring? ( cables)
 
Old 27th May 2012, 08:37 AM   #4196
diyAudio Member
 
Join Date: Sep 2010
Quote:
Originally Posted by ufokillerz View Post
http://i150.photobucket.com/albums/s...G_1033copy.jpg

This is how it looks in the ebay case, some space to play around with, height is perfect as mentioned.

cant get the image to show properly, so click on link!
Hi Ufokillerz, I would recommend to turn the SPMS600 180 degrees. This way you avoid routing of the NCore400 power supply cable across the SPMS600 or crossing of the mains power cable..
 
Old 27th May 2012, 12:33 PM   #4197
diyAudio Member
 
Join Date: Apr 2010
Thats great I have the same case which I've prepped and fitted the XLR connector - Hypex delivery should be tomorrow - AJ
 
Old 27th May 2012, 02:26 PM   #4198
diyAudio Member
 
Join Date: Aug 2011
Quote:
Originally Posted by ufokillerz View Post
http://i150.photobucket.com/albums/s...G_1033copy.jpg

This is how it looks in the ebay case, some space to play around with, height is perfect as mentioned.

cant get the image to show properly, so click on link!

What are those things left and right of the SMPS?
 
Old 27th May 2012, 02:31 PM   #4199
diyAudio Member
 
Join Date: Aug 2011
Quote:
Originally Posted by ufokillerz View Post
http://i150.photobucket.com/albums/s...G_1033copy.jpg

This is how it looks in the ebay case, some space to play around with, height is perfect as mentioned.

cant get the image to show properly, so click on link!
Ok, ignore my last comment, I never closely observed the SMPS, Oups!
 
Old 27th May 2012, 04:33 PM   #4200
diyAudio Member
 
Join Date: Apr 2004
Location: New York
Quote:
Originally Posted by RogerSch View Post
Hi Ufokillerz, I would recommend to turn the SPMS600 180 degrees. This way you avoid routing of the NCore400 power supply cable across the SPMS600 or crossing of the mains power cable..
Thanks i will keep that in mind, new to diy, and all, but just wanted to put them in for some pictures.
 

Closed Thread


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hypex Ncore vs. NAKSA AlliumPorrum Class D 1 26th May 2015 07:36 PM
Problem with Hypex Ncore Koifarm Class D 29 13th October 2014 07:32 AM
Any news on hypex ncore 2.0? JZatopa Class D 1 13th August 2013 11:30 AM
Hypex UcD700 vs NCore Earbound Class D 25 15th March 2013 05:10 PM
Building a Hypex Ncore... Jabbejokker Class D 0 7th March 2013 10:08 PM


New To Site? Need Help?

All times are GMT. The time now is 12:08 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki