diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   Hifimediy T1, T2 or both to drive NHT SB-3's (http://www.diyaudio.com/forums/class-d/189920-hifimediy-t1-t2-both-drive-nht-sb-3s.html)

Sotirio 30th May 2011 09:05 AM

Hifimediy T1, T2 or both to drive NHT SB-3's
 
I am new to both class D amplifiers and switching power supplies. I have been driving a pair of NHT SB-3 speakers with a Dayton Audio APA150, and have been unimpressed with the sound. I ordered both the Hifimediy T1 and T2 amps to compare their sound driving my speakers which are rated at 8 ohms with an impedence drop to 4 ohms in the lower midrange. After this comparison I plan to modify the speakers for biamplification using both amp modules. I would like to use PLLXO's but an electronic cross over would also be an option. Does anyone have experience on what I should expect with my T1/T2 comparison or with my biamplification scenario?


All times are GMT. The time now is 07:42 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2