|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Class D Switching Power Amplifiers and Power D/A conversion |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th May 2011, 04:17 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
How to connect Hypex Molex to XLR?
Hi
I already have finished my first Hypexamp (400UCD SMPS 12000, Softstart) and now i have to connect the Hypex-Molex to RCA and XLR. The Molexwires have 1 red, 1 white wire and little separate black wire (see pictures below). I already have soldered the connection between RCA and XLR (is this correct?). So now, how i have to connect the Molexwires with the XLR? I would be very pleased to get some help! Thanks a lot Souldriver 
Last edited by souldriver; 4th May 2011 at 04:24 AM. |
|
|
4th May 2011, 09:08 AM
|
#2 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
Nobody any idea!
|
|
|
|
4th May 2011, 06:18 PM
|
#3 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
...Really?
|
|
|
|
4th May 2011, 06:30 PM
|
#4 |
|
diyAudio Member
Join Date: Oct 2009
|
Q: I would like to switch from XLR to RCA and vice versa without the need of pulling the unused cable out of the amp.
A: That basically amounts to a source selector. Refer to http://www.hypex.nl/docs/wiring.pdf for information of how to wire an RCA connector to the UcD module. Install a DPDT switch to connect the hot/cold inputs of the UcD module to either pins 2/3 of the XLR connector or to the signal and shell contacts of the RCA connector. Note that pin 1 of the XLR connector is not switched, but remains hardwired to chassis. The RCA shell contact also remains hardwired to the chassis. This means that when the DPDT switch is set to RCA, the cold input of the UcD module is grounded via the RCA connector. |
|
|
|
4th May 2011, 07:15 PM
|
#5 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
Thanks Gazza for your help. i tried to get the wiring document from hypex but it looks like thatthis document isnt available anymore (404 error message). do you know where i could find this document somewhere else?
Thanks again |
|
|
|
4th May 2011, 07:37 PM
|
#6 |
|
diyAudio Member
Join Date: Oct 2009
|
sorry i dont,ive never built a hypex ucd amp,but when i wired up my icepower asp1000 amps i used the power amp daigram on this page
6moons audio reviews: JE Audio VL20 & VS70 |
|
|
|
4th May 2011, 07:45 PM
|
#7 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
no problem and thanks for the link but i need to know how the molex stuff has to work. now i am looking to find this wiring document from hypex. again, thanks a lot Gazza
|
|
|
|
4th May 2011, 08:07 PM
|
#8 |
|
diyAudio Member
Join Date: Oct 2009
|
have a look at this pdf it may help
http://www.diycable.com/main/pdf/exodus_docs.pdf |
|
|
|
5th May 2011, 03:16 AM
|
#9 |
|
diyAudio Member
Join Date: Dec 2005
Location: Zürich
|
Thanks Gazza. This is very interesting.
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [HELP] Which Molex Terminals for CL240D10C | dsolodov | Parts | 2 | 10th September 2010 10:11 PM |
| Hypex DS4.0 - XLR | Tiff_Needle | Class D | 2 | 14th July 2010 10:48 AM |
| Is it possible to connect both XLR and RCA inputs at the same time into an Aleph 5 | Rony1 | Pass Labs | 7 | 21st March 2010 03:42 PM |
| How to connect molex/ multipin connector | lgreen | Construction Tips | 10 | 25th August 2009 12:26 AM |
| RCA to XLR cable, where to connect the sleeve? | klitgt | Parts | 12 | 24th February 2005 07:15 PM |
| New To Site? | Need Help? |
| Page generated in 0.09385 seconds (75.57% PHP - 24.43% MySQL) with 11 queries |
