Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Hypex PSU HG and T-Net Caps
Hypex PSU HG and T-Net Caps
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 10th April 2011, 08:07 PM   #1
ilwooz is offline ilwooz  Italy
diyAudio Member
Join Date: Dec 2008
Default Hypex PSU HG and T-Net Caps

Hi Everybody,
I'm going to build a dual mono UcD180HG HxR amplifier with linear power supply (2x UcD Supply HG Mono + 2x TR180 transformers). I'd like to improve a little the design right from the start and so I'm thinking to use T-Network caps. Now, I'm an absolut beginner, my skills are no more than just be able to connect the boards together and do some very simple solder joints.
That said, I did not really understand if there's a simple way to just put these T-net caps between the supply boards and the UcD180 boards without any other advanced tweak (I mean modify or even build a new power supply), something like just connect one 10000 uF 63 V 4 pole cap per side (for a total of 2 caps, one for the right channel and one for the left). Is that possible? I studied a lot the (many) past threads here on diyaudio about the use of the 4 pole caps but have not found anything about an upgrade of the Hypex power supply. Would be correct to run a wire from the + and - of the power supply board to the corresponding inputs of capacitor, and then from the + and - outputs of the capacitor to the inputs of the UcD board (each channel independent)? But what about the ground?

Probably the above connection has no sense or it's even totally wrong (please say something...) but assuming that may be "technically" acceptable (i.e. doesn't destroy the amplifier or explode the whole house), would make sense to have some advantages in terms of performance? Or would be totally useless or even worse?

Sorry for my poor english and, mostly, for my ignorance in electronics.

Thanks a lot and best regards!
  Reply With Quote


Hypex PSU HG and T-Net CapsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
f/s hypex ucd400 hg with onboard hxr regs slr 5000 Swap Meet 8 17th March 2009 11:26 AM
Mute 3 UcDs with Hypex supply HG reins Class D 0 8th January 2009 08:18 PM
FS Hypex UCD 400 HG modules + Signal cables courage Swap Meet 2 19th July 2008 05:18 AM
Hypex UcD400 HG Monos for sale sbrtoy Swap Meet 10 29th June 2008 01:30 PM
Hypex HG power supply carlos spud Class D 6 24th October 2005 02:39 PM

New To Site? Need Help?

All times are GMT. The time now is 04:26 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio