Dear Mr. Kartino
Do you have distributor for assembled PCB from this amp ?
I want buy if possibile
please send me PM if available
hi
i work with stm32f7 too
i want use tda7317 and 7318 in my design.
please share your tda7416 schematic with me in q1audiopro@gmail.com
do you have advice for me about audio processor ic ?
i like DSP for this type projects.
thank you
Triell 3200
Hello dear diy and masters. I need help. I made 2 boards triell 3200 (post 2078) and smps xp-5000 (do not use this smps).
I have 4 high-quality power supply - eltek. It's 54v 35a.
I will connect consistently two on left and two on right board. It will turn out +54-0-54v and +54-0-54v.
What do I have to change in boards of amplifiers to use +/-54v, instead of standart 127v?
What elements I need to replace?
Help me please. Thanks, and sorry for my bad english.
Hello dear diy and masters. I need help. I made 2 boards triell 3200 (post 2078) and smps xp-5000 (do not use this smps).
I have 4 high-quality power supply - eltek. It's 54v 35a.
I will connect consistently two on left and two on right board. It will turn out +54-0-54v and +54-0-54v.
What do I have to change in boards of amplifiers to use +/-54v, instead of standart 127v?
What elements I need to replace?
Help me please. Thanks, and sorry for my bad english.
Hi dear
my TDA7318 is work fine.
if you have a telegram account give it to me
may be can help you to crate it with ST MICROCONTROLER or AVR
have good time.
My New PCB , IRS-2000D , will be IRS-3000D if used +/-130V.
how did it go with the 3000d irs? I want to put it together to use it with 8 ohms.
Only keep the op amp at input stage to be enough voltage supply, no drop.
I dodnt use DSP library,(cubemx,KEIL) stm32f103c8 board to control LCD and I2C audio prosessor and usb mp3 decoder chip(china) easy
yes its easy and good,
but the problem is ADC reading speed and LCD responce time
PIC and arduino libraries cannot adjest ADC read time and LCD dealy time.so the spectrum annelyzer not responce smooth
Last edited:
this is mikroc cord for TDA7318 PIC16f887
rotary encoder+ china remote +LCD module+EEProm memory
https://www.youtube.com/watch?v=RcGN6nR861I
try your own C cord , help with this ,I2C send, bass,trible,volume- calculation,rotary encoder part,IR sensor part,innerupt
rotary encoder+ china remote +LCD module+EEProm memory
https://www.youtube.com/watch?v=RcGN6nR861I
try your own C cord , help with this ,I2C send, bass,trible,volume- calculation,rotary encoder part,IR sensor part,innerupt
Hi
select a stm32 chip
i will write a code for your chip
I2C is a simple protocol for me
you help me before and i am happy for help you
have good time bro
