TC Electronics Switch amp - Page 6

AP2 · 25th January 2010, 02:02 PM

Hi,
Thanks for the information, I will try to ask for a form TC.
to previous discourse, I must clarify that I mentioned B & O and Hypex for reference only theoretical.

Regards

AP2 · 25th January 2010, 02:20 PM

To: EVA
Hi, You have Skipe?

Eva · 25th January 2010, 02:21 PM

Just for clarification: A LC output filter does not add any delay to the signal above the resonant frequency, high frequencies are phase reversed but not delayed at all, so a simple RC phase lead network makes a single loop post-filter system unconditionally stable.

AP2 · 25th January 2010, 02:22 PM

I mean .. skype, sorry

AP2 · 25th January 2010, 02:25 PM

Yes,lc not problem, pre-driver/driver yes..many delay and other introduces.

Eva · 25th January 2010, 02:29 PM

What do you mean by "pre-driver/driver"?

AP2 · 25th January 2010, 02:35 PM

comparator--Dt/logic (if it)--driver. 3 stage for amp.
previous post. refers to an amplifier with audiophile performance only.
normal also hi-power not problem with chip driver.

Charles Darwin · 25th January 2010, 02:59 PM

Just out of curiosity: Does anybody know anything about this class D amp:
MC2 Audio - E45 Introduction

I am very fond of their class A/B amps (I've got three of them) but have never heard this one. And no I don't really need that much power!

AP2 · 25th January 2010, 03:08 PM

I do not know this amp, looks good.
date .. it seems very good.
who knows who designed the PSU!

Charles Darwin · 25th January 2010, 03:22 PM

There are two may be three main possibilities on who designed the psu:
Terry Clarke (founder of Klark Teknik), some HiFi consultant guy by the name of Ian McCarthy or the people who founded XTA.

25th January 2010, 02:21 PM	#53
Eva diyAudio Member Join Date: Oct 2003 Location: Near the sea	Just for clarification: A LC output filter does not add any delay to the signal above the resonant frequency, high frequencies are phase reversed but not delayed at all, so a simple RC phase lead network makes a single loop post-filter system unconditionally stable. __________________ I use to feel like the small child in The Emperor's New Clothes tale

25th January 2010, 02:29 PM	#56
Eva diyAudio Member Join Date: Oct 2003 Location: Near the sea	What do you mean by "pre-driver/driver"? __________________ I use to feel like the small child in The Emperor's New Clothes tale

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Never released TC Sounds 15" Driver	eccl1213	Swap Meet	4	22nd February 2009 09:46 PM
TC Sounds (aka Audiopulse) LMT TC-9 (predecessor to LMS)	DavidJanszen	Swap Meet	1	5th June 2008 06:32 PM
switch-on, switch-off sequence for preamp/amp	cbutterworth	Tubes / Valves	1	2nd March 2007 01:41 PM
Main on/off switch for amp using a piezo switch	using_e	Solid State	13	20th June 2006 06:55 PM
1.2k vs 2.5k TC on a 6550 amp?	killerfishes	Tubes / Valves	3	29th June 2005 03:38 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th January 2010, 02:02 PM	#51
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	Hi, Thanks for the information, I will try to ask for a form TC. to previous discourse, I must clarify that I mentioned B & O and Hypex for reference only theoretical. Regards

25th January 2010, 02:20 PM	#52
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	To: EVA Hi, You have Skipe?

25th January 2010, 02:22 PM	#54
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	I mean .. skype, sorry

25th January 2010, 02:25 PM	#55
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	Yes,lc not problem, pre-driver/driver yes..many delay and other introduces.

25th January 2010, 02:35 PM	#57
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	comparator--Dt/logic (if it)--driver. 3 stage for amp. previous post. refers to an amplifier with audiophile performance only. normal also hi-power not problem with chip driver.

25th January 2010, 02:59 PM	#58
Charles Darwin diyAudio Member Join Date: Nov 2009 Location: Birmingham, UK	Just out of curiosity: Does anybody know anything about this class D amp: MC2 Audio - E45 Introduction I am very fond of their class A/B amps (I've got three of them) but have never heard this one. And no I don't really need that much power!

25th January 2010, 03:08 PM	#59
AP2 diyAudio Member Join Date: Dec 2009 Location: Italy	I do not know this amp, looks good. date .. it seems very good. who knows who designed the PSU!

25th January 2010, 03:22 PM	#60
Charles Darwin diyAudio Member Join Date: Nov 2009 Location: Birmingham, UK	There are two may be three main possibilities on who designed the psu: Terry Clarke (founder of Klark Teknik), some HiFi consultant guy by the name of Ian McCarthy or the people who founded XTA.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)