My Sure TA2024 Tripath Arrived! - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th November 2009, 07:53 AM   #1
diyAudio Member
 
Join Date: Oct 2009
Default My Sure TA2024 Tripath Arrived!

Only down side is a Dell laptop PS @20V wouldn't run it. After reading the chip specs I thought it would be safe to go over the reccomended 9-14V. Makes me wonder if there is some over voltage protection... No big loss as I stated in another thread, this is intended to go on my boat with 12V.

For testing I settled on a 6V 1.5 amp wall wart. I tried several PS and voltage didn't make a noticible difference in volume or sound quality. This could be due to the low level of drive available from my MP3/4 player.

I had some old car stereo speakers boxes ~2 way 6.5" and 3" 20 Watt that had been collecting dust for at least 4 years.

I'm pleased with the performance! Things will only get better from here. Idea was to just set up a stereo on the boat that you would could plug your MP3 player into. I have two 4 gig MP3 players and a Motorola cell phone that all include FM recievers. The output of the MP3 players is just enough to drive headphones at a solid level of output so they will not drive the TA2024 to distortion levels even with the weak PS. Matter of fact I checked voltages and while there was some fluctuation at full volume it stayed in the 9.6-9.8V range => never really taxed the PS.

Listened to everything from early Fleetwood Mac to Dave Brubeck and it all sounds good even with the cheap speakers and weak power supply. Listening levels are just below pain threshold. If I close my eyes when listening to Brubeck I can almost convince myself it is a live performance.

The thing runs COOL! Hard to tell it is even on. I really think this is the perfect amp for my purpose. Almost everything that goes into it converts to sound rather then heat making it perfect for a sailboat. The inability to turn the volume up to the point of distortion has to be seen as a plus. Half a dozen of my kids and their knucklehead friends in drunken stupors on the boat with a dangerous level of big audio is something to be avoided!

Rick
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tripath TA2024/20 Bridge/Parallel Config john65b Class D 17 15th May 2014 04:08 PM
Tripath RB-TA2024 Board Q's HaLo6 Class D 4 4th June 2009 03:32 AM
50 RMB( 5,- EUR ) Tripath TA2024 PCBA's Arjen China Vendor's Bazaar 58 27th February 2009 03:25 AM
New kit with the Tripath TA2024 kanaddict Class D 10 26th July 2005 11:14 PM
New parts arrived & will foloow with kit, !!!!S1 12pcs arrived from Holland!!!! tube-lover Swap Meet 1 4th September 2004 12:29 AM


New To Site? Need Help?

All times are GMT. The time now is 08:58 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2