6000W By IRS2092

[Eva]

The achievements I mention are part of recently designed state-of-the-art commercial products, I can't share the details until these products become obsolete, but I can help other people to improve their results, provided that they already have something working I'm actually giving a lot of information telling that it is possible. In fact, I've achieved 6000W/2ohm/1sec/33%duty from eight IRFB4227 reliably.

 

[foxeletronic]

6000 watts, voltage or voltage that aplicaste symmetric.
Thanks!

 

[Valenca]

Is Over ?

 

[superfigone]

Hi Sorry,
This is lastest shematic. My supply is +-70V.

you have a pcb of this? thanks

 

[mgee]

6kw @ 2 or 4 or even 8.pls specify. as mono not in bridge. which spice was used to simulate this circuit. also specify the supply rail voltage n current.

''everybody got surname''
thanx in advance.

 

[mgee]

myIR2092V2.pdf witch spice did u use to simulate this amp

 

[binhdinhquetoi]

Vietnamese WHO IN THIS NO
MORE ENGLISH pass. incomprehensibility

 

[luka]

Vietnamese WHO IN THIS NO
MORE ENGLISH pass. incomprehensibility

use google translate

 

[binhdinhquetoi]

thank you

 

[nopy4uk]

Hello

Please send me a copy of schematic and pcb at my mail andreyiorlov@gmail.com
Thanks you.

 

[Hadighorbani]

what about exit core ?
T106-2 ?
how much powere can handel T106-2 ?

 

[dairen]

The mosfet driver totem pole BJTs are rated 80V so the
supply must be below +/- 80V.

 

[aman khalsa]

happy new year to all diyers.....

 

[stewin]

happy new year diy audio world
and a happy and a prosperous new year

 

[sayam4444]

this is pcb layout

hi
I designed a PCB for this amplifier but I replace transistors with two driver circuits if you have something better please send to me at gabriel_seku@yahoo.com

 

[vdij]

IRS2092+UCC37322+IRFP4227, U+-65V, R-4 Om.

 

[student_sound]

Hi vdij !

Hi friend !
can i ask you some things ?
i m new in class d, i built irs2092 amps 7d, with no input signal , but the output have some hi frequency noise like post #7
http://www.diyaudio.com/forums/class-d/226126-sure-irs2092-amp-issue-please-help.html

Can i ask you what's wrong with it ?

Regards !

 

[Baldin]

IRS2092+UCC37322+IRFP4227, U+-65V, R-4 Om.

Looks good
Any information on your SMPS?
Baldin

 

[Baldin]

Hi friend !
can i ask you some things ?
i m new in class d, i built irs2092 amps 7d, with no input signal , but the output have some hi frequency noise like post #7
http://www.diyaudio.com/forums/class-d/226126-sure-irs2092-amp-issue-please-help.html

Can i ask you what's wrong with it ?

Regards !

What you are probably experiencing is interfeerence from one chenel to the other (called beating), either EMI or through supply. If only on e chenel is connected, do you then hear whistling? If you use a SMPS the problem can also araise between amp and SMPS.
Problem araises from the switching noise generated by the switching components, and especially if you have say two chenels where the main switching freq in two chenels are different by less than 20 kHz.
Proper layout, shielding etc. helps a lot. but try lowering the switch freq of one chanel, or try insert some chokes on the different wires (keep these short ... they are like antennas).
Baldin

 

[student_sound]

hi Baldin !

hi Baldin !
Thanks for your replay ! i use classic xfmr power supply, and if i test channel one and channel two shutdown, the result is the same, i dont know why ?
please help me !

Regard !