Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th October 2009, 02:47 AM   #1
diyAudio Member
 
Join Date: Aug 2009
Default OEG SDT-S-109LMR relay help me power my amp

Hi, I'm tinkering with an old subwoofer that came with a dvdset(Akai DV-3400SS), what i want to do is remove the amplifier and use it for another subwoofer, the problem is i believe it requires a b+ 10v power from a dvd to power on.
The small PCB that receives the 230v power cord has an OEG SDT-S-109LMR component on it(Power PCB Relay) which i suspect triggers on/off depending on whether that 10v line is present. I need someone to tell me if I'm right and if its possible to bypass this component to allow me to have it ON as soon as i plug in the power cord in the wall(without the dvd present)

I can't take pictures of the PCB's atm but if the need is there i can get some.

Here's a PDF i found on tyco electronics website.
Customer Drawing PDF
relays.tycoelectronics.com/datasheets/SDT-R.pdf

There's no On switch on the subwoofer, btw the Sub and Amp share the same "box", all the other speakers connects to the back of the subwoofer(making sure there's no confusion). I believe it only powers on if the dvd is powered on, the amplifier pcb says "B+/10v" on one solder point below the 9pin miniDIN socket in which you plug in the DVD. There's a green LED which indicates if the amp/sub is On, it never goes on if i just plug in the amp/sub to the wall socket. The transformer has 3 cables in it, on the TOP of the coil there's 1 cable(red+white+red wires) in the front, and 1 cable(yellow+black+yellow wires) in the back, then at the BOTTOM of the transformer there's 1 blue cable(2 blue wires) leading back to the pcb, tracing one of the blue wires going back to the pcb, it leads into the OEG SDT-S-109LMR, and the other blue wire leads to the blue wire on the power cable connected to the wall socket.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What type of Relay for a power amp? Electro-mechanical? Brit01 Solid State 8 11th August 2008 02:46 PM
Power relay suppliers in canada ruerose The Lounge 1 15th June 2007 08:24 PM
Relay for power on ThSpeakerDude88 Car Audio 13 1st October 2006 08:37 PM
Chip Amp Power Relay logonwheeler Chip Amps 10 15th September 2006 08:36 AM
Power-on relay circuit, i/o connector 2Bak Everything Else 1 15th March 2003 08:25 PM


New To Site? Need Help?

All times are GMT. The time now is 10:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2