diyAudio (
-   Class D (
-   -   Active filter to Class-D amp. (

Cyberzim 10th October 2009 11:54 AM

Active filter to Class-D amp.
I have got the TPA3122 class-d amp to work perfectly, and now I want to make an active low - and highpass filter so I can create a soundsystem.
My only problem is that I only get noise when I setup my activefilter with a TL072 opamp, so I'm wondering if there are some specific opamp to use with class-d?
Here is an example of a setup I used with no results.

Cyberzim 10th October 2009 02:17 PM

1 Attachment(s)
Hmm.. link doesn't work, I'll try again.

Simon H.A.

runebivrin 10th October 2009 06:06 PM

You have no ground reference for the non-inverting input. That's not going to work very well. You need maybe 100kOhm between the input and ground.

All times are GMT. The time now is 05:27 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2