Hifonics 1606D & 1608D mosfets?

Doffo · 9th October 2009, 05:44 AM

Hello,

This is my first time around here. I actually ran into alot of the guides that come from this site, so it seems like a great place to ask some questions.

I have two Hifonics brutus amps that need both the power fets and the output fets replaced. To my knowledge, the 1606D need the HIP4080 replaced too if it threw itself in protect mode. though nothing was burnt, it just permanently threw itself in it, so it may be a good idea to replace the fets along with the HIP4080.

The Hifonics brutus 1608D is much newer, and I did desolder all of the fets off of the board, and I tested for the 5v on the power fets side, and they all fell near 5v, so the driver board may be ok. My question is if I can get the mosfet numbers that would work for these amps. I believe they are both different for each amp since if the year differences.

Any help would be great. Thanks!

Doffo · 24th October 2009, 06:17 PM

anyone have an idea?

9th October 2009, 05:44 AM	#1
Doffo diyAudio Member Join Date: Oct 2009	Hifonics 1606D & 1608D mosfets? Hello, This is my first time around here. I actually ran into alot of the guides that come from this site, so it seems like a great place to ask some questions. I have two Hifonics brutus amps that need both the power fets and the output fets replaced. To my knowledge, the 1606D need the HIP4080 replaced too if it threw itself in protect mode. though nothing was burnt, it just permanently threw itself in it, so it may be a good idea to replace the fets along with the HIP4080. The Hifonics brutus 1608D is much newer, and I did desolder all of the fets off of the board, and I tested for the 5v on the power fets side, and they all fell near 5v, so the driver board may be ok. My question is if I can get the mosfet numbers that would work for these amps. I believe they are both different for each amp since if the year differences. Any help would be great. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hifonics Bxi 1606d Please Help	dmeche	Class D	3	25th July 2009 08:15 PM
hifonics BXi 1606D burnt resistors???	gadgeteer123	Class D	7	30th June 2009 09:55 PM
Sub for Gen VII HiFonics	Morts	Car Audio	0	26th May 2009 05:29 PM
Hifonics BX1000D	Dobermann	Car Audio	2	26th September 2008 05:27 PM
Hifonics Problem	swordfish689	Car Audio	5	2nd April 2007 04:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th October 2009, 06:17 PM	#2
Doffo diyAudio Member Join Date: Oct 2009	anyone have an idea?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)