diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   Hifonics 1606D & 1608D mosfets? (http://www.diyaudio.com/forums/class-d/153131-hifonics-1606d-1608d-mosfets.html)

Doffo 9th October 2009 05:44 AM

Hifonics 1606D & 1608D mosfets?
 
Hello,

This is my first time around here. I actually ran into alot of the guides that come from this site, so it seems like a great place to ask some questions. :D

I have two Hifonics brutus amps that need both the power fets and the output fets replaced. To my knowledge, the 1606D need the HIP4080 replaced too if it threw itself in protect mode. though nothing was burnt, it just permanently threw itself in it, so it may be a good idea to replace the fets along with the HIP4080.

The Hifonics brutus 1608D is much newer, and I did desolder all of the fets off of the board, and I tested for the 5v on the power fets side, and they all fell near 5v, so the driver board may be ok. My question is if I can get the mosfet numbers that would work for these amps. I believe they are both different for each amp since if the year differences.

Any help would be great. Thanks! :D

Doffo 24th October 2009 06:17 PM

anyone have an idea? :)


All times are GMT. The time now is 06:45 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2