diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   multi channel t amp (http://www.diyaudio.com/forums/class-d/141724-multi-channel-t-amp.html)

kendt 4th April 2009 01:56 AM

multi channel t amp
 
I am thinking of building one of the audio digit multi channel t amps.
I have just finished a pair of open baffle's with mtm on the top and a bass driver. I was thinking of using two four-channel boards so that I could run a separate channel to each driver.

Would there be any advantage to this kind of set up over a regular 2 channel setup. Would it be worth the extra expense?

dweekie 4th April 2009 06:45 AM

Instead of the Audiodigit, I would suggest the new Gabrielle I started a thread on recently (diyparadise.com), or if you want to build up a board yourself, an Amp9/Amp9b (41hz.com). I thought the Amp9b was particularly nice.

kendt 4th April 2009 12:12 PM

Thanks I will take a look at the gabriel. I don't mind doing the chassis work and wiring but don't think i'll get into building the whole board.


All times are GMT. The time now is 06:03 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2