Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Another amp with IRS2092
Another amp with IRS2092
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th June 2008, 09:43 PM   #11
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
fillter board bottom layout
Attached Images
File Type: gif filter_bottom.gif (10.4 KB, 1250 views)
  Reply With Quote
Old 9th June 2008, 09:44 PM   #12
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
front panel
Attached Images
File Type: jpg front.jpg (84.3 KB, 1264 views)
  Reply With Quote
Old 9th June 2008, 09:46 PM   #13
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
back panel
Attached Images
File Type: jpg back.jpg (60.6 KB, 1102 views)
  Reply With Quote
Old 9th June 2008, 09:47 PM   #14
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
inside the amp
Attached Images
File Type: jpg inside.jpg (80.9 KB, 1216 views)
  Reply With Quote
Old 9th June 2008, 09:48 PM   #15
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
motherboard close up
Attached Images
File Type: jpg mother_board.jpg (89.7 KB, 1202 views)
  Reply With Quote
Old 9th June 2008, 09:49 PM   #16
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
filter board close up
Attached Images
File Type: jpg filter_board.jpg (77.7 KB, 888 views)
  Reply With Quote
Old 10th June 2008, 07:01 AM   #17
luka is offline luka  Slovenia
diyAudio Member
 
luka's Avatar
 
Join Date: Sep 2005
Location: in Slovenia :)
Another amp with IRS2092
Hi

I have nothing but respect, but why did you take wire from battery all over the board, why didn't you make holes on other side, and put input on other side too? that way you wouldn't have power cables going all over the board... And why did you make it for only +/- 30, I mean you would make it for +/-50 and have lot of power in reserve, you would be far from clipping at any time

You really did good you at this amp too
__________________
home page @ http://www.classdaudio.tk/ @ 24/7 all year long
I FEEL SLOVENIA
  Reply With Quote
Old 10th June 2008, 08:18 AM   #18
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
Hi Luka,
the original plan was with the input board on the other side but,
for mechanical reasons, the PCB hit the output class-D inductors and so I can not close the box.

I have put it on the other side just for this. The input are on the same side on the filter board to avoid running low level signal cables all around the box. There is just a short connection with a twisted pair from the RCA plug to the PCB.

Battery cables are on the back side because doing like this the front panel is already full, so I prefer to use the back side.

About power supply:

The voltage is ajustable, with the current trafo I can go up to +/-48V. Now it is regulated at 37V. The problem is that with such high voltage the output power will be something around 250Wrms. The amplifier itself can handle that power but the SMPS I don't know. I have tried it with continuous 300W load with no problem but I don't know (and I don't want to know...) whats happens with more.

There is no heatsink for the power devices, I just use the aluminium box. Everything stays pretty cool at 120+120W but what happens at 250+250W???

This amp will be used for the front mid high section of my car stereo. It will drive a 16.5cm woofer and a tweeter installed on the front door. I don't think that such speakers will last too much with 250W.

ciao
  Reply With Quote
Old 10th June 2008, 10:35 AM   #19
luka is offline luka  Slovenia
diyAudio Member
 
luka's Avatar
 
Join Date: Sep 2005
Location: in Slovenia :)
Another amp with IRS2092
Hi

I understand, but amp could still runn at higher voltage, you don't need to use all the power, just as much you need, and that AL box should be more then enough for cooling... I don't know why you put such big ones on other amp, it is not AB amp, and you don't drive 1R loads, so it doesn't heat at all, not even close to heat those heatsinks up...what do you think?
__________________
home page @ http://www.classdaudio.tk/ @ 24/7 all year long
I FEEL SLOVENIA
  Reply With Quote
Old 10th June 2008, 09:11 PM   #20
mag is offline mag  Switzerland
diyAudio Member
 
Join Date: Jan 2008
Location: Chiasso
Hi Luka,
you are right, the heatsink on the 900W amplifier was a bit overkill. It was my first design with class_D and it was hard to believe for me that such an high powered amplifier almost doesn't heat up at all.

About the maximum power I prefer to limit it trough the rail voltage. Having a 250W amp driving a small 16cm speaker will for sure blow it up shortly.

I have installed the two amps in my car and, believe me, still 120+120W + 900W on the sub is loud as hell. I don't think I need more power....

If you try to build my amps please let me know what you are doing, especially about post filter NFB. I have put it as an option on the PCB but never had time to test it. It is possible that nothing is running or even that everything blows up, who knows?


ciao
  Reply With Quote

Reply


Another amp with IRS2092Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
IRS2092 Amplifier zox2003 Class D 24 3rd June 2018 03:30 AM
Class-D Amp with IRS2092 mag Class D 196 2nd June 2018 12:28 PM
IRS2092 customizable DarkOne Class D 55 30th July 2014 10:15 PM
IRS2092 Amp Design: Please help! Devendra Class D 11 17th March 2011 09:10 AM
Any suggestion for IRS2092 ja2dhc Class D 4 2nd August 2008 10:53 AM


New To Site? Need Help?

All times are GMT. The time now is 08:40 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki