diyAudio (
-   Class D (
-   -   41Hz AMP2 upgrade... What parts to upgrade? (

MotoMan_Yz400 5th March 2008 04:22 PM

41Hz AMP2 upgrade... What parts to upgrade?
I'm looking on the 41Hz website, and under AMP2 they show different configurations that you can do with this amp to achieve different power levels. However for 2x600watt they say it will need to have some parts upgraded to support this, and to refer to their forum for the upgrades. Well I dont see a thread stating what needs to upgraded. Has anyone tried this upgrade? And what needs to be changed to allow for the 2x600watt (besides more voltage)?

theAnonymous1 5th March 2008 04:51 PM

Everything you need to know is in the AMP2 forum. It's on the last page(11) labeled "Very high power applications on the AMP2 boards".

luka 6th March 2008 05:28 AM


You don't have to change anything, ok you do, overcurrent protection. Voltage is already set to work up to +/-65v, I have just put 12k for R111 and R211, to set overcurrent to 22A.Maybe increase dead time to max if you use it with sub.

What you should do in make litz wire like you get with kit, but with more wires in ||. Those inductors will heat up...Use fan, if you can, which would be over TK2350, cooling it + both inductors

BTW this amp is 400wRMS per channel, those 600w is probably music/dynamic sound.

All times are GMT. The time now is 06:19 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2