Before the Tri-Path website went down, I was looking into possibly building a class-D amp. I saw somewhere a single IC, that did all the work (feedback, PWM, etc) and you just needed small components (resistors, caps, inductors, etc) to add to it and then have this IC run into some FETs and you were basically done (well you know what I mean). The board really only had a handfull of parts on it, and seemed quite simple to make. Where can I find this again? I would like to start off small (10-50watts) and soon make a 500watt+ sub woofer amp. Thanks
I was looking more on the lines of a good working schematic, and then making my on PCB, ordering all the components myself and building. But... I guess those wouldnt be so bad as rear surround channel amps In the 41hz shop you can buy the chips only. There are many avalaible, for a while....
Another source is www.profusionplc.com
Another source is www.profusionplc.com
IRS2092 from IR is the best choice.
Equivalent to Tripaths Sigma Delta Modulation
https://ec.irf.com/v6/en/US/adirect/ir?cmd=catProductDetailFrame&productID=IRAUDAMP5
Equivalent to Tripaths Sigma Delta Modulation
https://ec.irf.com/v6/en/US/adirect/ir?cmd=catProductDetailFrame&productID=IRAUDAMP5
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.