diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   IRF540Z-class D power (http://www.diyaudio.com/forums/class-d/114273-irf540z-class-d-power.html)

zox2003 26th December 2007 06:31 PM

IRF540Z-class D power
 
How much power should we expect from pair of IRF540Z (suffix Z) in class D ,pushed by IR2010 on +/- 45V?
Theoretically I should be able to get about 250W,practically???

Regards

oldmaelstrom2 26th December 2007 07:08 PM

load impedance?

zox2003 26th December 2007 07:09 PM

4 ohms....

alfsch 26th December 2007 07:24 PM

depends on your supply...
if 40v at full power...200w out

Eva 26th December 2007 09:04 PM

There is a layout-dependent amount of overshoot on Vds that limits the maximum practical supply voltage for reliable operation. Supply pumping may be also a concern.

If you take a close look at the Vds of the low side MOSFET while switching high currents, you may see the overshoot.

Cross-conduction, if any, is another limiting factor. The more precise the switching "sequencing", the more close you can get to the limits.


All times are GMT. The time now is 07:22 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2