Pierre / ssanmor one and the same posters? - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Closed Thread
 
Thread Tools Search this Thread
Old 19th November 2007, 03:49 AM   #1
JohnW is offline JohnW  Hong Kong
diyAudio Member
 
JohnW's Avatar
 
Join Date: Jan 2004
Location: Discovery Bay, Prague, Paris...
Angry Pierre / ssanmor one and the same posters?

It has been confirmed to me that Pierre and ssanmor are the one and same posters.

While there’s always a fine line between supporting Diy’ers on this forum and promoting ones business, it’s a completely different matter to pass one’s self off as a “Diyer” while promoting your own products.

Here’s just a list of Pierre / ssanmor IP address, only the forum moderators can confirm the last 3 digits (xxx) of the IP address:-

Pierre:-

11-26-2004 IP: 195.235.92.xxx Spain

12-08-2004 IP: 80.58.1.xxx Sevilla Spain

11-15-2007 IP: 195.235.92.xxx Spain

11-15-2007 IP: 82.159.107.xxx “Webstar” Cable IP address in Spain

Well, none of these are from Paris France – as Pierre states as his location, in fact none of his IP address have ever been psoetd from Paris, unless he's using a VPN in Spain.

Ssanmor:-

07-31-2007 IP: 82.159.106.xxx Spain
05-19-2003 IP: 195.235.92.xxx Spain

Not only does Pierre clearly promote his own products as if he where a satisfied customer, but he even deceivingly ask other manufactures such as Jan Paul and other honest forum users for design help and even basic knowledge under the disguise.

Here’s just a sample of these request by “Pierre” :-

Help with feedback

New coldamp toy

IR21xx + mosfet drivers

Philips UCD application note

Hypex versus ColdAmp

32V 8A SMPS? Skynet 8080 max voltage?
“Ask coldamp (www.coldamp.com). They make a 400W SMPS, SPS30 I think they can sell them at different voltages if you ask. I asked them for a 30V/10A and they can do it, I suppose your request...”


Selecting coupling cap for half-bridge offline SMPS

“Hello all. I am designing a half-bridge switching power supply, in the range of 800W-1Kw. I would like to have your advice on what type of capacitor to use to couple one of the primary pins to the... Is this capacitor, for example, adequate, or too slow?”


Has anybody ever build IRAUDAMP?

“Did you use that mosfets with no additional driver but the IR2110? It has quite a large gate capacitance! What value did you use for the gate resistor? Did you measure the rise/fall time of the switching...”


Bigger coldamp module, available?

“Hello, I read some weeks ago that Coldamp is about to launch a bigger power Class-D amplifier, 700W or so. Does anyone know something about this, or when will it be available? I cannot find any info on...”


What do you guys think of this SMPSU?

“was also tempted to buy that one, but when I saw its size, cost and those scary snubbers, I discarded it. However, I bought Coldamp SPS80 PSU (www.coldamp.com). I use it with their modules...”


UCD400 Power supply question...

“My 2 cents... From my experience, supported by some posts here, you will find a very noticeable improvement by changing your linear PSU to a coldamp switching one, specially a deeper bass. I started with...”


Where to buy ICEpower amps?

“Well, I have not personally compared UcD to Coldamp, but read some reviews in this forum that said that coldamp sound was "richer" and bass deeper. Anyway, I think they must be in a very similar level...”


need+-42Vdc @5amp

“Have a look at: http://www.coldamp.com/opencms/openc...80/index.html?

I think that they can also provide custom voltage versions from +/-40 to the standard voltage,...”

Cad audio DK amps???

“You may also want to consider coldamp (www.coldamp.com)
They provide an absolutely excellent service, that was my experience and there have been some other posts in this forum remarking this...”

Hypex or NewclassD? Which is the Best Class D Amp there is????

“If it helps, I have only compared Coldamp to Hypex, and both of them sounding good, I clearly preferred Coldamp, even taking apart their higher flexibility and rudgedness.”

” Nice to hear that you also like them, Simon. When I bought my coldamp amplifiers, first I was using a linear PSU with 625VA transformer and LPS30 PSU, but then I "switched" to their switching PSUs. The...”


Class D/T DIY power amp on a budget!

“With that budget and power requirements I'd buy a Home Hi-Fi pack from Coldamp (1 SPS30 + 2 Bp4078). The price is 340 euro and you get a good 200W/ch at 4 ohm. I have personally tried only SPS30, but I...”

The list goes on and on and on…

DiyAudio Forum provides a great service to both hobbyist and Pro’s alike, but there dishonest use of our close community sickens me,

John Westlake
__________________
Life shouldn't be taken too seriously as at the end of the day you will not come out of it alive anyway…
 
Old 19th November 2007, 10:24 PM   #2
Eva is offline Eva  Spain
diyAudio Member
 
Eva's Avatar
 
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
Good job JohnW.

In fact, I remember Pierre asking dozens of elementary questions about class D and SMPS, particularly one or two years ago, so I'm sure he was not particularly experienced in these fields back then and he has learnt a lot from us. But seeing it from a positive point of view, at least he has been always wanting to learn. There are other people out there designing and seelling junk electronics that don't want to learn at all.

The really negative part is the fact that he used another nick to ask the questions... And to self promote later
__________________
I use to feel like the small child in The Emperor's New Clothes tale
 
Old 19th November 2007, 10:31 PM   #3
diyAudio Moderator
 
pinkmouse's Avatar
 
Join Date: Apr 2002
Location: Chatham, England


John first posted this yesterday, and we put it on hold until we had chance to investigate. We have now done so, and are confident that Pierre and Ssanmor are the same person, so both have been banned, as is our standard procedure for sock-puppets. We do try and keep this sort of thing under control, but occasionally some slip past us, and our thanks to John for bringing this case to our attention.
__________________
Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
 
Old 20th November 2007, 04:03 AM   #4
diyAudio Member
 
Workhorse's Avatar
 
Join Date: Dec 2004
Default Great Work John Westlake!!!

So the Coldamp guy Ssanmor is none other than the so called french engineer Pierre.........
I once emailed Pierre 2 years ago about the listening impressions of his experiments, and in regards i got "Sergio Sanchez Moreno"....i didn't payed attention to it, assuming that i might send that email to Ssanmor instead......
 
Old 20th November 2007, 07:03 AM   #5
diyAudio Member
 
jacco vermeulen's Avatar
 
Join Date: Oct 2004
Location: At the sea front, Rotterdam or Curaçao
Send a message via Yahoo to jacco vermeulen
Quote:
Originally posted by JohnW
their dishonest use of our close community sickens me
Good show, Mr Westlake.

My Left Foot turned out to be a sock-puppet too.
At first he claimed to be Irish, but he was just playing a part.
__________________
The buck stops Here
 
Old 20th November 2007, 11:42 AM   #6
diyAudio Member
 
Workhorse's Avatar
 
Join Date: Dec 2004
Pierre finds a new Company "Coldamp"
Hey, guys, new modules!
See how the hell he is bent on publicizing his stuff......hehehehe

I think one must claim royalty over Coldamp modules....

Pierre is taking help of Phase_Accurate[Charles] for implementing post filter feedback....
Help with feedback
Turn on/off transients

Pierre getting some Smps Help from Evita & others.....
SMPS control loop estability
Help with SMPS current sensing
A and T labs K6 SMPS for Class D amp use
Assymmetric outputs in half-bridge
audio SMPS startup

Pierre & Ssanmor talking about Crest Lt schematics
http://www.diyaudio.com/forums/showt...560#post188560
http://www.diyaudio.com/forums/showt...557#post702557

Pierre used to learn from these experts.....and then Ssanmor[pierre]used this in implementing into what we all know is Coldamp......really disgusting.....
 
Old 20th November 2007, 12:24 PM   #7
diyAudio Member
 
theAnonymous1's Avatar
 
Join Date: Feb 2004
Location: Anonymityville
With so much at risk for him (his good name), you think he would have at least been smart enough to use a proxy. Even 11 year olds know how to use proxies.
 
Old 20th November 2007, 12:33 PM   #8
diyAudio Member
 
theAnonymous1's Avatar
 
Join Date: Feb 2004
Location: Anonymityville
Hi again, how do you like my French IP?
 
Old 20th November 2007, 01:02 PM   #9
IVX is offline IVX  Russian Federation
diyAudio Member
 
IVX's Avatar
 
Join Date: Jul 2003
Location: Everywhere (Buddhist's context)
LOL Workhorse, who don't lies even once? Aha? So let's love a truth, for avoiding a shame.
SSanmor, if you don't like a truth, you must have an imagination at least.. did you hear about proxi something? Hint: http://www.iana.org/
My current IP: 221.6.15.152 it's China, it's me and my buddy Bruce in the HK city, but actually i'm in the Russia now..
Attached Images
File Type: jpg hk.jpg (57.8 KB, 844 views)
__________________
Best regards,
E1.
 
Old 20th November 2007, 01:13 PM   #10
luka is offline luka  Slovenia
diyAudio Member
 
luka's Avatar
 
Join Date: Sep 2005
Location: in Slovenia :)
Send a message via Skype™ to luka
Hi

You guys are good to find that out. I am reading what was posted and dieing from laughing so hard... great job anyway, and warning to other if someone is doing the same....
__________________
home page @ http://www.classdaudio.tk/ @ 24/7 all year long
I FEEL SLOVENIA
 

Closed Thread


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: Pierre Verany Digital Test CD set percy Swap Meet 0 28th March 2006 02:58 PM
pierre gabriel Mr Hayes Multi-Way 0 24th March 2004 02:42 AM
Top 20 posters Circlotron Everything Else 32 2nd June 2003 03:17 PM


New To Site? Need Help?

All times are GMT. The time now is 11:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2