SI T-amp different layout?
I am totally new to this. I bought a SI T-amp and have it opened up following the instructions here: http://www.michael.mardis.com/sonic/start.html under input mods, version 3 "stealth". The problem I am running in is this: The layout of my board is different then the one in the pictures. I have everything wired up according to the diagram except removing the resistors and bridging the caps. I took a picture of what my board looks like but I'm afraid it isn't too clear.
So.... What am I missing? Are there different layouts? Should I look for resistors and caps that are labeled the same? Will the amp still work with out this part of the mod? Will I blow it up if I turn it on at this point? Any help would be appreciated.
Re: SI T-amp different layout?
My understanding is there is 2 major PCB models, you may have an earlier version. There is some difference even in labeling so u can't just go by the part name. Hope panomaniac will see this, he is michael mardis.
|All times are GMT. The time now is 09:22 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio