class d tas5261

surya krishna · 4th August 2007, 10:18 AM

By little bit of confusion i send my forum as simulator.

surya krishna · 6th August 2007, 06:33 AM

I have an little idea of about tas5261. i use this IC an audio power amplifier. DOyou attach tas 5261 amplifier project thread to my thread

theAnonymous1 · 6th August 2007, 12:13 PM

Dude, give it up already before you get banned.

BWRX · 6th August 2007, 01:57 PM

Manohar, it is clear you are looking to base a project on TI's TAS5261 chip but exactly what is it you want help with?

The TI datasheet contains information you need to know about the chip: http://focus.ti.com/lit/ds/symlink/tas5261.pdf

TI also has application notes about their TAS5518-TAS5261 evaluation design that include schematics and a double sided PCB layout: http://focus.ti.com/lit/an/slaa332a/slaa332a.pdf

If you are not comfortable doing your own design use the evaluation design provided by TI or find a way to buy one of their evaluation modules. If you think this will be a good beginner's project you should strongly consider looking for something less complex, perhaps even a kit where the design is already proven.

surya krishna · 7th August 2007, 06:41 AM

ok, i have tas5261 datasheet,and read carefully about that fetures, application diagram also. It double sided pcb layout.
according to my openion: first i want to draw a circuit on pc with the interface ic and check it correctly after that i can draw the pcb layout. My openion is correct are not ? if it is correct give some guidence to me.
manohar

fumac · 7th August 2007, 10:53 AM

no one can do this Except ti,
u cant get the simulate mod from them
forget about it

RG
fumac

surya krishna · 14th August 2007, 06:09 AM

how i am get the simulate mod from the ti? i searched the ti .com for this simulate mod but i could not get.

surya krishna · 20th August 2007, 10:03 AM

in what way iam get the pcb simulate mod from the www.ti.com ?

BWRX · 20th August 2007, 11:09 AM

Manohar, have you tried asking TI? You are not going to get the "simulate mod" from anyone here because no one here has it.

surya krishna · 27th August 2007, 07:53 AM

Sorry iam not asking for about ti. ti has the simulate mod for tas5261 because it's their product. i am asking " in what way ti send simulate mod to me " that is most important to my project.
manohar.

4th August 2007, 10:18 AM	#1
surya krishna diyAudio Member Join Date: May 2007	class d tas5261 By little bit of confusion i send my forum as simulator. __________________ manohar

6th August 2007, 06:33 AM	#2
surya krishna diyAudio Member Join Date: May 2007	class d tas5261 I have an little idea of about tas5261. i use this IC an audio power amplifier. DOyou attach tas 5261 amplifier project thread to my thread __________________ manohar

6th August 2007, 12:13 PM	#3
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	Dude, give it up already before you get banned. __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

6th August 2007, 01:57 PM	#4
BWRX diyAudio Moderator Emeritus Join Date: Jan 2005 Location: Pennsylvania	Manohar, it is clear you are looking to base a project on TI's TAS5261 chip but exactly what is it you want help with? The TI datasheet contains information you need to know about the chip: http://focus.ti.com/lit/ds/symlink/tas5261.pdf TI also has application notes about their TAS5518-TAS5261 evaluation design that include schematics and a double sided PCB layout: http://focus.ti.com/lit/an/slaa332a/slaa332a.pdf If you are not comfortable doing your own design use the evaluation design provided by TI or find a way to buy one of their evaluation modules. If you think this will be a good beginner's project you should strongly consider looking for something less complex, perhaps even a kit where the design is already proven. __________________ Brian

7th August 2007, 06:41 AM	#5
surya krishna diyAudio Member Join Date: May 2007	class d tas5261 ok, i have tas5261 datasheet,and read carefully about that fetures, application diagram also. It double sided pcb layout. according to my openion: first i want to draw a circuit on pc with the interface ic and check it correctly after that i can draw the pcb layout. My openion is correct are not ? if it is correct give some guidence to me. manohar __________________ manohar


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th August 2007, 10:53 AM	#6
fumac diyAudio Member Join Date: Oct 2006	no one can do this Except ti, u cant get the simulate mod from them forget about it RG fumac

14th August 2007, 06:09 AM	#7
surya krishna diyAudio Member Join Date: May 2007	class d tas5261 how i am get the simulate mod from the ti? i searched the ti .com for this simulate mod but i could not get. __________________ manohar

20th August 2007, 10:03 AM	#8
surya krishna diyAudio Member Join Date: May 2007	classd tas5261 in what way iam get the pcb simulate mod from the www.ti.com ? __________________ manohar

20th August 2007, 11:09 AM	#9
BWRX diyAudio Moderator Emeritus Join Date: Jan 2005 Location: Pennsylvania	Manohar, have you tried asking TI? You are not going to get the "simulate mod" from anyone here because no one here has it. __________________ Brian

27th August 2007, 07:53 AM	#10
surya krishna diyAudio Member Join Date: May 2007	class d tas5261 Sorry iam not asking for about ti. ti has the simulate mod for tas5261 because it's their product. i am asking " in what way ti send simulate mod to me " that is most important to my project. manohar. __________________ manohar

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
class d tas5261	surya krishna	Class D	2	28th July 2007 06:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read