Favorite Threads and Posts in Class D Forum
 

This permanent thread is a place for links to threads or posts in this particular forum that are useful and/or exemplify the best of DIY Audio.

This is so others- especially newer members can find them. Feel free to post with these links and a brief comment on what the thread discusses. Occasionally the moderators will consolidate them into fewer posts.

Hi

It works, its powerfull and it is great to understand how amps of this nature work

http://www.diyaudio.com/forums/showt...0&pagenumber=1 ,
http://www.diyaudio.com/forums/showt...0&pagenumber=1

Info on getting iron powder cores and calculating inductors with them:

http://www.diyaudio.com/forums/showt...03#post1393703

here is another
 

My dealings with class D... trial/error...some comments and suggestions from forum members(some helpfull, others NOT) and coupled with simulations AND many hours of actual hardware REDO....

If your up to the challenge READING and UNDERSTANDING, then its good to go...

http://www.diyaudio.com/forums/showt...0&pagenumber=1

NOTE: LENGTHY


Enjoy :smash:

No doubt:
http://www.diyaudio.com/forums/class...irs2092-7.html
Amazing mixture of postings with good information & postings of unreflected acquisitiveness.

This one speaks out many things about the forum and commercialization:

http://www.diyaudio.com/forums/class-d/83424-crown-amplifier-kicked-out-d-amp-3.html#post1038006

Didn't notice that it hadn't made the "favorite" thread yet but my humble little Boominator build does seem to be a popular thread that has caused a fair bit of stir far beyond the normal audio diy crowd.

http://www.diyaudio.com/forums/class...y-machine.html

Hi friends
I use IRS2092-2pcs. with IRFP4227 in fullbridge - mode for 1000W amp...but I have a little problem ! - The OCP is work but for a each chanel singly,and IRF are not recommended CSD-pin - paralleled !
Can you help me ?
Best Regards
Vlado

SA-D2 12"
 

got xplod monoblock 1channel 600w rms @ 2ohms and 330w rms @4 ohm and SA-D2 12" DVC 600W RMS..
How do I wire speaker to amp? Thinking of each VC to each speaker output on amp...amp not 1ohm..help?