|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Class D Switching Power Amplifiers and Power D/A conversion |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st June 2007, 02:27 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2007
|
problem using tda 8920bj
I made a circuit similar to that given in the datasheet of philips tda8920bj(2 x 100W IC). But the ic doesn't seem to switch on.
I wanted to know how to measure the STABI voltage. When the mode voltage of 5.6V is given to pin 23 it is redcucing down to 0V,and when i remove the connection from this pin it becomes 5.6V from the supply using thezener diode. I saw EVA and Primoz dealings about this ic. I don't know even what kind of protection is activated in my circuit.Can anyone help to solve my problem? 
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mtx amp problem [[help!!]] | fuzzypinkhat45 | Car Audio | 3 | 8th July 2008 05:34 AM |
| I need help with a pot problem. | Harderror | Class D | 8 | 16th December 2006 04:04 PM |
| p3a problem | MaXiZ | Solid State | 17 | 16th July 2005 07:14 AM |
| GC amp problem | Jamh | Chip Amps | 30 | 6th April 2004 02:50 PM |
| New To Site? | Need Help? |
| Page generated in 0.05110 seconds (70.34% PHP - 29.66% MySQL) with 10 queries |
