new batch of mini Aleph amplifier and PSU boards

[batee]

Does anyone that's built one have any idea what caps they're intended for? Or what the size and lead spacing is?

Bryan

[jleaman]

I think it takes the panasonic Snap in cap's I can get briangt to post the parts express number.

[twitchie]

You can order the boards from www.chipamp.com not the aleph diyamp link posted above.

I have a Plitron 625VA 18+18V transformer pushing over 17A through one of the blue boards in an A30, and it hasn't melted a hole through the chassis yet, so I think 15A is safe (disclaimer: your mileage may vary)

[batee]

Thanks, that's what I wanted to know!

Any idea which Panasonics fit it? I'll probably use the largest 35-50WVDC caps that'll fit (whether I need to or not). I'm just trying to figure out what cost for those is going to be.

Bryan

[Jaac]

Originally posted by jleaman
I think it takes the panasonic Snap in cap's I can get briangt to post the parts express number.

On braingt his site he posted a excel sheet for the parts with partnr of digikey

I've done some searching on the panasonic site an came up with the following:

Digi-Key_________type________panasonic part#______can diameter

P6887-ND_____10,000uf 25v____ECO-S1EP103DA_____30mm
P6914-ND_____10,000uf 35v____ECO-S1VP103EA_____35mm
P6922-ND_____22,000uf 35v____ECO-S1VP223EA_____35mm
P6940-ND_____10,000uf 50v____ECO-S1HP103EA_____35mm
P6946-ND_____22,000uf 50v____ECO-S1HP223EA_____35mm

Al the panasonic caps that begin with ECO-s are 10mm pitch lead
source: panasonic site

look for "large can catalog" and "dimensions specifications"

[BrianGT]

Originally posted by pchw
Waiting for the Currently out of stock text to change

Sorry for the confusion. I put them on the Chipamp.com order page:
http://www.chipamp.com/orders.shtml

Everything seems to be fine for that order page. I will update the link on the Aleph page.

--
Brian

[Jaac]

I'm updating my paypal account you wil hear of me soon !

[twitchie]

The panasonic caps listed (and shown in the photos) are TSHA caps - the digikey numbers for those are in the excel spreadsheet

I used 22000uF 35V caps P6671-ND I think - I have the 15000uF caps as well P6668-ND.

There were some posts buried in some threads recommending the TSHA caps.

[MashBill]

Thanks Brian! I've been waiting on these for a long time! Order sent.

Thanks again!

Bill

[Jaac]

order sent, any idea how long it takes to arrive ?