• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

psu 10k uF cap, can 35v work if 50v is out of stock?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
linuxworks

linuxworks

Member
Joined 2008
netstuff.org
I'm building some of the snubberized CFM chipamp boards.

a week or 2 ago I found some of the nice 'fat' pany TSUP 10k uF caps and life was good. I like how they fit and look on that board.

now, everyone seems out of stock ;(

can I sub 35v parts instead of the 50v ones? I'm using either an 18v trafo (right now) or maybe 22v one. if I do use the 18v trafo, the 35v caps should easily be inside 18*1.414= 25v (right?)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom