diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Chipamp (http://www.diyaudio.com/forums/chipamp/)
-   -   Built mini-A power amplifier A20 (http://www.diyaudio.com/forums/chipamp/156127-built-mini-power-amplifier-a20.html)

HIFIDIY 4th December 2009 02:49 AM

Built mini-A power amplifier A20
 
The mini-A power amplifier system design concepts:

1)It is a small volume to achieve ultimate design, the internal installation of the mini-A 416W transformer and capacity of up to 17W6UF capacitance ,each sound channel using two pairs of ON-current output, fully can be defined as "small hot hatch" .

2)-compatible for easy expandability you DIY Interface , such as the reserve balance of input and modular post-and pre-grade circuit boards, these designs will greatly expanded-- if it is HIFIDIY future finished AUNE goods, we will get rid of the extension interface!

3) providing a good driving force and balanced tone, can drive the vast majority of speakers

4) The overall design of Fe-Al chassis to ensure better heat dissipation throughout the machine where there is more than just good solid nature of

More about this: йDIY
http://mall.hifidiy.net

pelayostyle 13th January 2010 09:25 PM

So this is basically a modified Krell KSA50?


All times are GMT. The time now is 07:09 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2