Need schematics and board files for parellel lm3886

clipto333 · 2nd April 2007, 03:27 PM

hi,

I need the schematic and board files for parellel lm3886tfs. i tried making a schematic in eagle but its really difficult for me. This is my first project. im going to etch the pcb myself as i cant get it made here in my city.

im going t make a single sided pcb. if anyone can help making a board design in eagle that will be excellent. ill post the pic of the schematic taken from http://www.shine7.com/audio/pa100.htm.

need board design for the psu also.

and

aso suggest which ps is better.

please guys help me.

cheers

clipto

abid_rehan · 3rd April 2007, 04:38 AM

You can use following layout for monoblock and with slight modification you could parallel it. I made it for a friend, since I am not a big fan of 3886 there I never did a parallel or bridge for it otherwise its justa a matter of modifying the layouts for parallel or bridge. As for PSU I dont think you need a regulated PSU for gainclone.
LT 1083/4/5 has regulation volatages from 3.3 to 12 v which does not fullfill power requirements for 3886, and for LM317 you would need a transistor stage to improve output current of 317.
Normally a regulated supply is not used for gainclones.

abid_rehan · 3rd April 2007, 04:55 AM

schematics are as follows:

Fenris · 3rd April 2007, 03:43 PM

Do you prefer SMT or through hole components? I have a single sided SMT design for an inverted LM3886 that will work with bridge or parallel. The only through hole components are a DC offset adjusting resistor and the larger capacitors.

clipto333 · 5th April 2007, 12:08 PM

Quote:

Originally posted by Fenris
Do you prefer SMT or through hole components? I have a single sided SMT design for an inverted LM3886 that will work with bridge or parallel. The only through hole components are a DC offset adjusting resistor and the larger capacitors.

hi,

please send the files of your inverted lm3886.

can you explain what to use in library fo resistors caps etc. i dnt know how build a board design with exact dimensions of resistors caps etc.

also if anyone has the files for eagle or any other software of pa100 amp can you post it here? i need software files.

please help

thanks

clip

Fenris · 5th April 2007, 04:31 PM

I'll post it tonight when I get home. I don't use Eagle, I use FreePCB. I can export to Gerber though.

3rd April 2007, 03:43 PM	#4
Fenris diyAudio Member Join Date: Jun 2004 Location: The last frontier	Do you prefer SMT or through hole components? I have a single sided SMT design for an inverted LM3886 that will work with bridge or parallel. The only through hole components are a DC offset adjusting resistor and the larger capacitors. __________________ Listen to the music through the stereo, not the stereo through the music.

5th April 2007, 04:31 PM	#6
Fenris diyAudio Member Join Date: Jun 2004 Location: The last frontier	I'll post it tonight when I get home. I don't use Eagle, I use FreePCB. I can export to Gerber though. __________________ Listen to the music through the stereo, not the stereo through the music.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Active filter plus LM3886 - one board	MJL21193	Chip Amps	197	2nd November 2008 11:50 PM
look for LM3886 board	mackin	Chip Amps	7	29th November 2006 07:07 AM
Upcoming LM3886 SMD board	JJJ	Chip Amps	8	6th November 2004 09:02 AM
Anyone have Aleph board gerber files?	BrianGT	Pass Labs	0	7th April 2002 10:06 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)