my system's spec are
for satalite channels - lm4780 in parallel mode giving 120 w of power(as shown in attachment)
for sub channel - i need a 200w of power (plz avoid use of inductor)
plus i need a PSU for this system
i have 2 way crossover for my system form ESU Pages
for satalite channels - lm4780 in parallel mode giving 120 w of power(as shown in attachment)
for sub channel - i need a 200w of power (plz avoid use of inductor)
plus i need a PSU for this system
i have 2 way crossover for my system form ESU Pages
Attachments
hey, according to the data sheet, input voltage range for the chip is 20 to 84 volts, so a 30-0-30 tranformer will work - it may not give you 120 watts out but it will work.
if you want to check out the data sheet look at:
www.national.com/pf/LM/LM4780.html
if you want to check out the data sheet look at:
www.national.com/pf/LM/LM4780.html
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- high power 6 channal amp