Mini AD815-based amp module
 

Here is an unusual design. I always build unusual stuffs.

Designed small AD815-based 2-channel amplification module.
Main job is high-quality headphones driver.
No problem to use it as a preamp output stage.
Also the module can be used as a long cable driver with impedance matching.

Need more info?

http://img87.imageshack.us/img87/144...210awn4.th.jpg

A schematic would be nice :)


/U.

Here is the schematics

More pictures.
Sorry for poor photo quality.

http://img168.imageshack.us/img168/5...224aay0.th.jpg

http://img168.imageshack.us/img168/9...230alb1.th.jpg

http://img168.imageshack.us/img168/2...237aoy3.th.jpg

http://img172.imageshack.us/img172/4...218awm6.th.jpg

That is well done board, and the circuit itself

have you checked the DC ofset on it?

Output offset = offset from the first OPAMP * overall gain (x3).
With OPA132UA, I get typical values about 1-1.5mV.
OPA627 give less than 1mV.
Input was shorted via pot.

Thats very good. are you thinking of selling those boards?

Yes, I have spare boards.
Parts or kits available as well.
Or assembled boards.
.

More pictures.
Here is main powered compact standalone headamp.
.
http://img301.imageshack.us/img301/9...243anp9.th.jpg
.
http://img146.imageshack.us/img146/6...246awq4.th.jpg
.
http://img155.imageshack.us/img155/9...248agv7.th.jpg
.
http://img78.imageshack.us/img78/351...249aox3.th.jpg
.
http://img78.imageshack.us/img78/505...250azd5.th.jpg
.