|Chip Amps Amplifiers based on integrated circuits|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|15th August 2006, 07:25 PM||#1|
Join Date: Jul 2006
PCB and Design needed
If anyone is interested, I am looking for someone to design a 10 channel amp for a dark ride. You can see the previous post under "10 channel amp" from mid July. I looked into chipamp.com but I have not heard anything back after several emails. I need the boards to be specifically designed for this purpose anyway.
The scope of work will include:
1. Design of amplifier circuit using the lm3886 (I already have 100 so I would like to use this chip) for the amplification of a Winbond ISD 1416 voice storage chip (visit Winbond's website for info). This circuit will be used 10 seperate times to create the 10 channels The circuit must include a volume control.
2. Power supply for all 10 channels. I would like to use one transformer for all 10 channels.
3. PCB design for amplifier and power supply circuits. The design must be given in a Gerber file for production.
There are a few other details on how the boards need to be laid out, but you get the idea of what I am looking for.
Please let me know if you are interested in the design and give me an idea of what the cost might be.
You can email me at firstname.lastname@example.org
Thanks for your help.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Design Needed||Bluto||Subwoofers||9||8th November 2007 06:24 PM|
|design help needed.||neazoi||Tubes / Valves||14||8th September 2007 04:43 PM|
|Advice needed for amp design||gpond||Chip Amps||3||29th August 2006 06:30 PM|
|Design needed for ts-w2000spl||domes||Subwoofers||1||28th January 2005 10:27 PM|
|New To Site?||Need Help?|