|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Chip Amps Amplifiers based on integrated circuits |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
13th May 2006, 04:27 PM
|
#1 |
|
diyAudio Member
Join Date: Mar 2006
Location: San Francisco, California
  
|
Amplifier I/O help?
I need to figure out how to turn off an amp I'm making without discharging the caps and not letting the circuit strain for energy.
Let me explain: Switch | Pin 1 Pin 2 Pin 3 (imagine a rocker switch and these are in a logical order) If Pin 3 is - 24 volts, and Pin 1 is + 24 volts, and pin two is input to the amp; the amp has a bunch of capacitors that should discharge; what do i need to do? I know a resistor for a slower discharge is a bad idea cos when the switch is on, it would make the resistor really hot! If anyone has ANY ideas, please tell me! 
|
|
|
13th May 2006, 08:19 PM
|
#2 | |
|
diyAudio Member
Join Date: Jul 2005
Location: North Derbyshire
|
Re: Amplifier I/O help?
Quote:
__________________
Nigel Goodwin |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted: DIY amplifier builder with experience. I need a 0.7 ohm stable amplifier | Audiophilenoob | Swap Meet | 34 | 16th May 2005 11:58 PM |
| Questions about how to decrease the PASS A-40 amplifier into a class AB amplifier. | novtango | Pass Labs | 2 | 21st October 2002 01:50 AM |
| New To Site? | Need Help? |
| Page generated in 0.06681 seconds (68.85% PHP - 31.15% MySQL) with 10 queries |
