Is this radiator suitable my 7293 project?

Bassterror · 27th April 2006, 02:04 PM

Hi,

i'd like to hear your opinion about using this radiator for my 2.1 Project:

300x180x40mm, 2,3kg, baseplate is 8mm thick.

Enough for 3x 2 TDA7293 parallel at +-30V?

Thanks,
Stephan

Bassterror · 27th April 2006, 02:10 PM

I mean 30V AC, thus +-42VDC.

Is it possible to edit your posts in this forum?

Stocker · 27th April 2006, 06:57 PM

within a half-hour, you have an "edit" button on the bottom of the post, where the "report" button is on other peoples' posts.

XELB · 27th April 2006, 07:11 PM

I have never tried the TDA but I could say that these heatsink could handle 4 LM3886 @ +/- 30Vcc

Fossil · 28th April 2006, 08:40 AM

the kitset I worked on had a heatsink abt 120 x 100 x 40mm and it's meant for 2xtda7294!

Bassterror · 29th April 2006, 06:01 PM

OK, I'm going to try it.

Thanks for your estimations

mashoni23 · 23rd August 2011, 04:00 PM

i wish i has on of those for my project..

27th April 2006, 02:04 PM	#1
Bassterror diyAudio Member Join Date: Mar 2006 Location: Niedersachsen	Is this radiator suitable my 7293 project? Hi, i'd like to hear your opinion about using this radiator for my 2.1 Project: 300x180x40mm, 2,3kg, baseplate is 8mm thick. Enough for 3x 2 TDA7293 parallel at +-30V? Thanks, Stephan

27th April 2006, 06:57 PM	#3
Stocker diyAudio Member Join Date: Dec 2003 Location: Austin	within a half-hour, you have an "edit" button on the bottom of the post, where the "report" button is on other peoples' posts. __________________ Jesus loves you.

27th April 2006, 07:11 PM	#4
XELB diyAudio Member Join Date: Dec 2004 Location: Lisboa	I have never tried the TDA but I could say that these heatsink could handle 4 LM3886 @ +/- 30Vcc __________________ If you want power you must add control

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tda 7293 and tda 7294 help	sagarverma	Chip Amps	85	22nd March 2013 08:15 PM
Looking for Amp project suitable for a 35V and 15V Transformers?	bezobraznia	Solid State	18	10th February 2005 11:54 PM
Suitable regulated/filtered 4volt battery-valve power supply suitable for 6+ valves?	Layberinthius	Tubes / Valves	0	11th March 2004 08:49 PM
PA Amp with TDA 7293...Questions...	iCebReakEr409	Solid State	5	8th August 2002 08:59 PM
Looking for Amp project suitable for a 35V Transformer	ptrapp	Solid State	11	2nd October 2001 05:28 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2006, 02:10 PM	#2
Bassterror diyAudio Member Join Date: Mar 2006 Location: Niedersachsen	I mean 30V AC, thus +-42VDC. Is it possible to edit your posts in this forum?

28th April 2006, 08:40 AM	#5
Fossil diyAudio Member Join Date: Sep 2001 Location: SG	the kitset I worked on had a heatsink abt 120 x 100 x 40mm and it's meant for 2xtda7294!

29th April 2006, 06:01 PM	#6
Bassterror diyAudio Member Join Date: Mar 2006 Location: Niedersachsen	OK, I'm going to try it. Thanks for your estimations

23rd August 2011, 04:00 PM	#7
mashoni23 diyAudio Member Join Date: Jul 2011	i wish i has on of those for my project..

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read