Hello,
A new amp of my friend (Leach amp) uses one big 40-0-40 480VA toroidal with 8x 6,800UF cap. The electricity is 220V, and slow blow 2 Amp (and later 3A) is used.
The problem is the circuit breaker is sometimes automatically cut or the lights/TV (near the power amp) usually dim for a short period when the power amp turn on. I guess it's from the inrush current. Any effective & simple way to solve this issue? Will connecting two CL60s to each of 220V wire for the Class AB amp help? Thanks.
A new amp of my friend (Leach amp) uses one big 40-0-40 480VA toroidal with 8x 6,800UF cap. The electricity is 220V, and slow blow 2 Amp (and later 3A) is used.
The problem is the circuit breaker is sometimes automatically cut or the lights/TV (near the power amp) usually dim for a short period when the power amp turn on. I guess it's from the inrush current. Any effective & simple way to solve this issue? Will connecting two CL60s to each of 220V wire for the Class AB amp help? Thanks.
Hi,
Watch here :
http://sound.westhost.com/project39.htm
Note that sometimes surge protection devices are sold separately in electronics shops.
Regards,
Lukas.
Watch here :
http://sound.westhost.com/project39.htm
Note that sometimes surge protection devices are sold separately in electronics shops.
Regards,
Lukas.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.