Does V+ == -(V-) have to hold?
 User Name Stay logged in? Password
 Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read Search

 Chip Amps Amplifiers based on integrated circuits

 Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
 4th April 2006, 06:22 PM #1 stelleg151   diyAudio Member   Join Date: Oct 2005 Does V+ == -(V-) have to hold? I was thinking that although most people do +/- say 30VDC, that maybe the only reason that its done that way is because thats how the trasformer+rectifier output it. But looking at schematics I was thinking that really all that should matter is the difference between V+ and V-, at least for a simple GC setup like Brians. Am I wrong?
 4th April 2006, 07:02 PM #2 analog_sa   diyAudio Member     Join Date: Aug 2002 Location: Cascais It will clip asymmetrically and at lower power.
 4th April 2006, 07:04 PM #3 DcibeL   diyAudio Member     Join Date: May 2003 Location: Saskatchewan As long as your common point is half way between the rails, I think you are okay. If common (ground) is not half way between the rails, then you will se a DC offset at the output, and will be forced to use a huge capacitor at the output to block that DC. __________________ The power of Science compels you!
hitsware
diyAudio Member

Join Date: Mar 2002
Quote:
 Originally posted by DcibeL As long as your common point is half way between the rails, I think you are okay. If common (ground) is not half way between the rails, then you will se a DC offset at the output, and will be forced to use a huge capacitor at the output to block that DC.
Wrong. the supplies can be assymetric, and the output will still quiess at 0 volts (as long as the minimum voltage for operation is maintained (at both rails))

 4th April 2006, 10:24 PM #5 DcibeL   diyAudio Member     Join Date: May 2003 Location: Saskatchewan Hmm..I'll take your word about this for now, but I will have to test this when I get the chance. __________________ The power of Science compels you!
 4th April 2006, 10:32 PM #6 Bazukaz   diyAudio Member     Join Date: Nov 2005 Location: Vilnius I think hitsware is right. If both output and input is referenced to one ground point, output should sit at ~0 V dc , even if this "ground" is not exactly half between the rails. Try a simulator and you will see.
 4th April 2006, 11:34 PM #7 pinkmouse   diyAudio Moderator     Join Date: Apr 2002 Location: Rotherham, England Ok, lets work this out properly. Say you have an (ideal) chip amp with a gain of 20, and rails at +20V and -10V, and the signal is coming in as a 1V peak to peak sinewave. The input has no bias, i.e. it oscillates around the zero point, so the output signal will swing fine to the +20, but when it needs to swing negative, it will only be able to get to -10V before the wave is clipped. To be able to swing rail to rail with no clipping, you need to bias the input up to a point where it is halfway between the rails, and reduce the gain so the amp doesn't clip, so in this case, you need to add an offset voltage to the input signal, and reduce the gain to 15. This bias voltage carries right through the amplifier, producing an output offset of +5V as well, so to avoid blowing up your speakers, you then need to remove this, which is why you would need a DC blocking cap on the output. Does that make sense? __________________ Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
 5th April 2006, 12:21 AM #8 DcibeL   diyAudio Member     Join Date: May 2003 Location: Saskatchewan Yes, the bias voltage is required at the input in order for output to swing rail to rail. I must have had a brain fart this morning, I was trying to think back to when I learned single supply op-amps in school. I guess I am already loosing my memory in my old age . __________________ The power of Science compels you!
cpemma
diyAudio Member

Join Date: Jul 2003
Location: S Yorkshire OK
Quote:
 Originally posted by DcibeL ...I was trying to think back to when I learned single supply op-amps in school. I guess I am already losing my memory in my old age .
Maybe you're not ready for the knackers yard just yet - some opamps aimed at single-supply applications (eg, LM324, LM358) will swing down to ground but only up to 1.5-2V short of the positive rail, so there may be a point in setting their virtual ground a volt below midway to get the maximum swing.

Not hi-fi though.

 5th April 2006, 01:46 AM #10 tiltedhalo   diyAudio Member   Join Date: Sep 2005 Location: Melbourne Florida V+==V- Pinkmouse is very correct, for the amplifier to swing symetrically rail to rail the center has to be the center, see the point in center???

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Site     Site Announcements     Forum Problems Amplifiers     Solid State     Pass Labs     Tubes / Valves     Chip Amps     Class D     Power Supplies     Headphone Systems Source & Line     Analogue Source     Analog Line Level     Digital Source     Digital Line Level     PC Based Loudspeakers     Multi-Way     Full Range     Subwoofers     Planars & Exotics Live Sound     PA Systems     Instruments and Amps Design & Build     Parts     Equipment & Tools     Construction Tips     Software Tools General Interest     Car Audio     diyAudio.com Articles     Music     Everything Else Member Areas     Introductions     The Lounge     Clubs & Events     In Memoriam The Moving Image Commercial Sector     Swap Meet     Group Buys     The diyAudio Store     Vendor Forums         Vendor's Bazaar         Sonic Craft         Apex Jr         Audio Sector         Acoustic Fun         Chipamp         DIY HiFi Supply         Elekit         Elektor         Mains Cables R Us         Parts Connexion         Planet 10 hifi         Quanghao Audio Design         Siliconray Online Electronics Store         Tubelab     Manufacturers         AKSA         Audio Poutine         Musicaltech         Aussie Amplifiers         CSS         exaDevices         Feastrex         GedLee         Head 'n' HiFi - Walter         Heatsink USA         miniDSP         SITO Audio         Twin Audio         Twisted Pear         Wild Burro Audio

 Similar Threads Thread Thread Starter Forum Replies Last Post boxcustom Car Audio 2 5th May 2006 06:40 AM boxcustom Car Audio 0 22nd February 2006 07:50 AM R. McAnally Digital Source 1 23rd February 2002 08:20 AM

 New To Site? Need Help?

All times are GMT. The time now is 08:50 AM.