After looking through the instructions, I was left with a few questions.
1. Is the capacitor in the Chill-Amp 2 input a 22uf or .22uf capacitor?
2. Would having such small caps hinder performance? (1000uf per rail is pretty low.)
3. Could a CarlosFM style set of snubbers (1 for each of the 1000uf caps) help?
4. Could a simple snubberized PSU (think Chipamp.com-style, with only a cap, a bypass cap, and a snubber per rail) help the sound?
5. Would a single 4.7 uf polypropylene cap work on the input? (I have yet to find the 22uf cap he mentioned, an Elna Silmic II 22uf cap, anywhere).
Thanks!
1. Is the capacitor in the Chill-Amp 2 input a 22uf or .22uf capacitor?
2. Would having such small caps hinder performance? (1000uf per rail is pretty low.)
3. Could a CarlosFM style set of snubbers (1 for each of the 1000uf caps) help?
4. Could a simple snubberized PSU (think Chipamp.com-style, with only a cap, a bypass cap, and a snubber per rail) help the sound?
5. Would a single 4.7 uf polypropylene cap work on the input? (I have yet to find the 22uf cap he mentioned, an Elna Silmic II 22uf cap, anywhere).
Thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.