If I was to buy a dual mono lm4780 kit from chipamp.com (when they get them back in stock), and I bridged them together by way of using a DRV134 like here:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=71502&perpage=10&highlight=&pagenumber=2
Am I right in thinking that I would get roughly 240wRMS, 480wPEAK power?
If anyone is wondering, this is going to be used for a bass amp.
http://www.diyaudio.com/forums/showthread.php?s=&threadid=71502&perpage=10&highlight=&pagenumber=2
Am I right in thinking that I would get roughly 240wRMS, 480wPEAK power?
If anyone is wondering, this is going to be used for a bass amp.
So from what I gather it would go something like this:
__paralleled lm4780 + goes to plus of speaker
Input from bass -> preamp/eq -> DRV134 -|_paralleled lm4780 + goes to neg of speaker
Now for the questions:
Does that sound right?
What will one lm4780 give for power (RMS and PEAK)?
What would this give me for power (RMS and PEAK)?
*Assume an 8ohm load and proper transformer/PSU setup for max power.
__paralleled lm4780 + goes to plus of speaker
Input from bass -> preamp/eq -> DRV134 -|_paralleled lm4780 + goes to neg of speaker
Now for the questions:
Does that sound right?
What will one lm4780 give for power (RMS and PEAK)?
What would this give me for power (RMS and PEAK)?
*Assume an 8ohm load and proper transformer/PSU setup for max power.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.