Which Chip for first DIY project?

systemerror909 · 8th January 2006, 06:13 PM

I am ready to give building a chip amp a try, and hope to be ordering one of the kits off of chipamp.com soon. Each of the three projects look doable, but which one should I choose? LM4780, LM3886 or LM 3875? I haven't really found a good explanation of the differences between these three kits. I don't need an extremely powerful amp, just something very clean and detailed, I'm driving a pair of Wharfedale Diamond 8.2's rated at 6 ohms.

Tweeker · 8th January 2006, 06:25 PM

LM3875 is or will soon be obsolete and less available.

The LM4780 is two LM3886s in one device.

pplu · 8th January 2006, 10:51 PM

Please, have a look:

Improving the Non-Inverting chipamp

Easy and very, very good.

Regards.

Jose Luis.

Dominick22 · 9th January 2006, 05:32 AM

I just did my first amp project as well. I literally just finished and I did the dual mono LM 4780 kit which might drive your speakers nicely.

I also suggest that you buy from Peter Daniel. His kits are nice and for a first timer, he is a big help.

Also, I am at your disposal. I'd love to help. Just shoot me an e-mail.

Peter Daniel:
audiosector.com

Dominick in New Jersey

8th January 2006, 06:13 PM	#1
systemerror909 diyAudio Member Join Date: Apr 2005 Location: rochester	Which Chip for first DIY project? I am ready to give building a chip amp a try, and hope to be ordering one of the kits off of chipamp.com soon. Each of the three projects look doable, but which one should I choose? LM4780, LM3886 or LM 3875? I haven't really found a good explanation of the differences between these three kits. I don't need an extremely powerful amp, just something very clean and detailed, I'm driving a pair of Wharfedale Diamond 8.2's rated at 6 ohms.

8th January 2006, 06:25 PM	#2
Tweeker diyAudio Member Join Date: Dec 2004 Location: Cincinnati, Ohio	LM3875 is or will soon be obsolete and less available. The LM4780 is two LM3886s in one device. __________________ Be sure your foil hat has a good low impedance ground.

9th January 2006, 05:32 AM	#4
Dominick22 diyAudio Member Join Date: Aug 2005	I just did my first amp project as well. I literally just finished and I did the dual mono LM 4780 kit which might drive your speakers nicely. I also suggest that you buy from Peter Daniel. His kits are nice and for a first timer, he is a big help. Also, I am at your disposal. I'd love to help. Just shoot me an e-mail. Peter Daniel: audiosector.com Dominick in New Jersey __________________ A real amateur enthusiast!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First Chip amp project - TA7270P	Bow	Chip Amps	3	21st October 2008 12:51 PM
Suggestions for a chip amp Kit or Project?	santiu	Chip Amps	5	12th November 2005 05:06 PM
new project - chip amp??	yuval	Chip Amps	3	14th July 2003 01:47 AM
A new chip amp project	JOE DIRT®	Chip Amps	11	17th June 2003 02:56 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th January 2006, 10:51 PM	#3
pplu diyAudio Member Join Date: Jun 2004 Location: Madrid	Please, have a look: Improving the Non-Inverting chipamp Easy and very, very good. Regards. Jose Luis.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read