Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

DIY Volume Remote Controlled for our GC??
DIY Volume Remote Controlled for our GC??
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th November 2005, 08:28 AM   #1
thomgun_lc is offline thomgun_lc  Indonesia
diyAudio Member
 
Join Date: Mar 2005
Location: Indonesia
Talking DIY Volume Remote Controlled for our GC??

Some people like to use analog volume control. But when we sit far from our system,it's difficult to adjust the right volume with our listening position.So, i think we need to build DIY remote controlled volume for our GC.
So, i think to build this remote controlled volume. Of course we need to use Digital Potentiometer, Transmitter and Receiver Infrared and a Microcontroller as a controller for this digital remote volume control.
Does anyone know how to build that digital remote controlled volume?

regards
---------
TomZ

Maybe, i will use at89s51 as a controller.
  Reply With Quote
Old 28th November 2005, 02:51 PM   #2
rehanabid is offline rehanabid  Pakistan
diyAudio Member
 
Join Date: Mar 2007
there are lots of threads on this subject in this forum, do have a search and u ll come across many particularly related to PIC16F877.
  Reply With Quote
Old 29th November 2005, 04:22 AM   #3
jaycee is offline jaycee  United Kingdom
diyAudio Member
 
Join Date: Apr 2004
Location: Norwich, UK
For 2 channels, you wouldn't need to use a digital potentiometer chip/volume control IC. You could use a motorised potentiometer. All you would have to do is set up a H Bridge to drive the motor (or get an IC to do that). You do however still need a microcontroller for decoding RC5 infrared though.
  Reply With Quote
Old 29th November 2005, 07:48 AM   #4
thomgun_lc is offline thomgun_lc  Indonesia
diyAudio Member
 
Join Date: Mar 2005
Location: Indonesia
Ok, maybe i should search for H-bridge driver. But i will get a difficult in mechanic construction especially about gear.
I don't know how to build this remote motor for volume.
I know 89s51 languange. it's very easy to drive the motor. but difficult for the Ir transmitter and receiver.
it is a PWM pulse?with a vary duty cycle for each button?

regards
---------
TomZ
  Reply With Quote
Old 29th November 2005, 10:07 AM   #5
rehanabid is offline rehanabid  Pakistan
diyAudio Member
 
Join Date: Mar 2007
In such a case i d suggest u to pay a visit to this thread and drop me a line at my email and then may be we could help each other out.
http://www.diyaudio.com/forums/showt...786&highlight=
  Reply With Quote
Old 29th November 2005, 10:31 AM   #6
dhengkoel is offline dhengkoel  Indonesia
diyAudio Member
 
dhengkoel's Avatar
 
Join Date: Nov 2001
Location: Batam
hi tom,

try this link: http://sound.westhost.com/project110.htm


regards:
ragil hastomo
__________________
:: The last but not least ::
  Reply With Quote
Old 29th November 2005, 11:42 AM   #7
jbateman is offline jbateman  United States
diyAudio Member
 
Join Date: Oct 2000
Location: The People's Republic of Maryland
This place sells a pre-programmed micro controller which will decode a Sony IR remote...that would solve most of your problem right there:
http://www.rentron.com/remote_control/IR-D15A.htm
  Reply With Quote
Old 30th November 2005, 10:31 AM   #8
thomgun_lc is offline thomgun_lc  Indonesia
diyAudio Member
 
Join Date: Mar 2005
Location: Indonesia
Hi dhengkoel!!Can i pm u?
Thx guys. I have a conclude for this problem. It is easier when we build this remote volume using mechanic with a less programming. If i use digital potentiometer we need some a lot of programming.
I have an idea to make this project more easy. How about if we used some branded transmitter like our Tv's remote or Sony's remote control (transmitter).
Each have different pulse width, so we only build receiver and a digital potentiometer using dallas IC's DS18xx.How about that?
Does digital potentiometer give some terrible effect to my GC's?


regards
----------
TomZ
  Reply With Quote
Old 30th November 2005, 07:18 PM   #9
BrianDonegan is offline BrianDonegan  United States
diyAudio Member
 
BrianDonegan's Avatar
 
Join Date: Dec 2004
Location: TPA HQ (The Basement)
We should be adding a remote function for our Kookaburra and (when available) source selector very soon, if that helps anyone.
  Reply With Quote
Old 28th May 2010, 07:48 AM   #10
tvicol is offline tvicol  Romania
diyAudio Member
 
tvicol's Avatar
 
Join Date: Jan 2005
Location: Bucharest
DIY Volume Remote Controlled for our GC?? DIY Volume Remote Controlled for our GC??
We already have developed a R2R/Shunt volume controller with LED / LCD display.
GB for R2R audio volume / input selection pcb

Also you have entire project (schematic, gerber files, LCD and LED atmega firmware) presented on vicol audio : r-2r volume controller


Please leave a message if you are interested, on GB thread. The webshop will open 7.iune at 12:00gmt.

Regards,
Tibi

PS. Sorry ... now I see that this thread is quite old. :-(
__________________
Vicol Audio
  Reply With Quote

Reply


DIY Volume Remote Controlled for our GC??Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lite Audio MV-01 / MV-06 remote controlled volume/input selector roffe Parts 82 16th March 2016 03:23 PM
Remote Controlled CD-Rom Controller john65b Swap Meet 5 31st May 2009 04:03 AM
I need the infrared remote control schematic for motor controlled volume pot noyan Parts 4 24th July 2007 03:05 PM
Remote Controlled Tube Amp SHiFTY Tubes / Valves 4 16th February 2003 10:58 PM
remote controlled preamp karellen Solid State 4 5th July 2002 06:50 PM


New To Site? Need Help?

All times are GMT. The time now is 08:30 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki