Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Best SMD resistor/capacitor for GC
Best SMD resistor/capacitor for GC
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st August 2005, 05:35 AM   #11
Arius is offline Arius  United States
diyAudio Member
 
Join Date: Mar 2004
Location: California
Quote:
I like the heavy duty RIFA caps and they can't be found with lower ratings. 63 V is a bit little when you have 24 VAC => 2 x 24 x 1.4 Volts.
Duh! I did forget something. Diodes/caps in a bridge sees twice the voltage. My GC is OK. Running 2 X 22VAC but my soon to be ready Leach clone has 100V caps off 40V AC rails (rest of PSU caps are 63V). I'll get that fixed. Thanks.

Back to the topic, I tried fiddling with a SMD layout for GC but found that it's hard to be more compact than my current layout using 1206 resistors & other SMD parts.

The attached placement has a Zobel, both high/low freq decoupling caps, bypassed feedback cap, input HF filter all in a nice, tight space.
Attached Images
File Type: jpg lm3886s.jpg (47.3 KB, 664 views)
  Reply With Quote
Old 31st August 2005, 06:24 AM   #12
alexw88 is offline alexw88  Hong Kong
diyAudio Member
 
Join Date: Mar 2004
Location: HK
I am also making a PA150 board with SMD parts :

Click the image to open in full size.

Click the image to open in full size.
__________________
My Audio Page
  Reply With Quote
Old 31st August 2005, 08:23 AM   #13
peranders is offline peranders  Sweden
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
Best SMD resistor/capacitor for GC
Looks nice and I see you are also brave using SMD parts.
__________________
/Per-Anders (my first name) or P-A as my friends call me
Group buy: SSR03 Super Regulator Power Supply. Sign up HERE 72 pcb's ordered, 72 paid. Still possible to sign up.
  Reply With Quote
Old 1st September 2005, 03:22 AM   #14
Ipanema is offline Ipanema  Malaysia
diyAudio Member
 
Ipanema's Avatar
 
Join Date: Jun 2004
Location: KL
Hi Alexw88,

What is PA150? and what is the function of trimpot on your board?

Thanks.
  Reply With Quote
Old 1st September 2005, 03:35 AM   #15
alexw88 is offline alexw88  Hong Kong
diyAudio Member
 
Join Date: Mar 2004
Location: HK
PA150 means three 3886 paralleled, able to deliver ~150W into 2 ohms.

It is an inverted configuration, the trimmer is to adjust the DC offset. I measured the DC offset to be < 1mV after adjusting each trimmer.

My plan is to bridge 2 of these broads using DRV134, to deliver 300W into 4 ohms.

P.S. I have to admit that most of the idea came from this Jeff Rowland Model 10, which also use SMD parts.

Click the image to open in full size.
__________________
My Audio Page
  Reply With Quote
Old 1st September 2005, 04:03 AM   #16
Ipanema is offline Ipanema  Malaysia
diyAudio Member
 
Ipanema's Avatar
 
Join Date: Jun 2004
Location: KL
Would you mind to post your PA150 schematic over here?

Thanks.
  Reply With Quote
Old 1st September 2005, 05:44 AM   #17
peranders is offline peranders  Sweden
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
Best SMD resistor/capacitor for GC
I think you can guess it. Count the parts and place them in a schematic.
__________________
/Per-Anders (my first name) or P-A as my friends call me
Group buy: SSR03 Super Regulator Power Supply. Sign up HERE 72 pcb's ordered, 72 paid. Still possible to sign up.
  Reply With Quote
Old 1st September 2005, 03:16 PM   #18
alexw88 is offline alexw88  Hong Kong
diyAudio Member
 
Join Date: Mar 2004
Location: HK
As P-A said, it is quite simple. You may already guessed what the schematic look like.
Attached Images
File Type: gif pa150.gif (14.9 KB, 398 views)
__________________
My Audio Page
  Reply With Quote
Old 18th April 2017, 08:36 PM   #19
DanSoare is offline DanSoare  Europe
diyAudio Member
 
Join Date: Dec 2016
Location: Bucharest
Best SMD resistor/capacitor for GC
Quote:
Originally Posted by Ipanema View Post
Hi,

I am building my GC with SMD components, since GC sounds better with short signal path and less parasitics compoents as some claims. I know this is nothing new.

Pls advise me on the type of SMD resistor / capacitor that will sounds good for GC. I have in mind to use 1206 size thick film resistor and 0.1uF ceramic capacitor for PS decoupling since 1206 size is easier to handle by my hand.

I also come across thin film resistor, which is more expensive. May I know what is the difference between thick film and thin film or is there any other types of SMD resistor worth considering?

As for capacitor, some tantalum SMD types claim to have very low ESR. Will this be better than ceramic SMD?

Thanks for your advise.

This topic was open almost 12 years ago. Today, what do you think about SMD audio caps?
  Reply With Quote
Old 19th April 2017, 12:43 PM   #20
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
NP0 ceramic are even more available for audio duty.
X7R are still available for local supply rail decoupling.
Both of the above are now widely available in MLCC and give much higher capacitances than were available 12years ago.
Metal film in 1% are more widely available but there is a big variation in pricing.
Metal film 0.1% are still expensive, but fortunately only required in very few locations.
Metal oxide 1% 100ppm/C or 150ppm/C have become more available at quite cheap pricing.
Take care to check datasheet for maximum voltage and maximum dissipation. You do not want to get to close to their limits and amp performance is demonstrably better if you operate well below maximum limits.

There are a few doing film caps in smd, but they are difficult to find stockists and prices can be high due to low turnover.
__________________
regards Andrew T.
  Reply With Quote

Reply


Best SMD resistor/capacitor for GCHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Resistor and Capacitor Listening Test SY Parts 45 30th August 2011 06:12 PM
where is a resistor or a capacitor very important? Stefanoo Pass Labs 5 12th January 2007 08:10 AM
resistor and capacitor values for Aikido preamp cbutterworth Tubes / Valves 8 26th October 2006 09:21 PM
resistor capacitor values DD_Davo Parts 6 9th February 2006 08:52 PM
What's worse: a resistor, a capacitor or an inductor? serengetiplains Parts 5 30th April 2004 06:09 PM


New To Site? Need Help?

All times are GMT. The time now is 10:36 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki