diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Chip Amps (http://www.diyaudio.com/forums/chip-amps/)
-   -   can someone look at this and point me in the right direction? (http://www.diyaudio.com/forums/chip-amps/63401-can-someone-look-point-me-right-direction.html)

thermonuclear 29th August 2005 11:56 PM

can someone look at this and point me in the right direction?
 
I have bought two of Brians LM3886 Dual Mono kits and one LM3875 Stereo kit. I was going to buy my transformers from Apex JR but I don't see the specs being expressed in the same terms I see you guys use all the time.

Is their a toroid on this page that will work for powering both mono blocks at a 8ohm load? And one that would be acceptable for running the stereo 3875 8ohms as well. Or is there one that I could use to run all three amps?

http://www.apexjr.com/miscellaneous.html#Toroids

mateo88 30th August 2005 02:36 AM

You should probably look elsewhere for transformers, such as parts express. There don't seem to be any ideal transformers listed, although the Avel-Lindberg transformer rated at 150 VA may work, albeit not too terribly well, for a stereo lm3875 or a monoblock lm3886.


All times are GMT. The time now is 09:08 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2