Comparison between STK modules

Tekko · 13th July 2005, 12:00 PM

I took liberty to open a STK4151V module to find out it has bigger cooling blocks than the 407-050. The STK4151V is 0.08% THD and the other is probobly 0.1-1% THD. Both are specced 30W min.

Heres a pic:

metal · 13th July 2005, 01:01 PM

Hello

Thats not a problem

Aother thing to mention, THD has nothing to do with the sizes of output power transistors, as you can see from the picture you have taken, the substrate is smaller for STK407-050, while for STK4151V is larger, so it makes sense to be smaller for STK407-050.

Also you have to note that STK407-050 are designed for small rack stuff, I mean where space is not helping.

Last thing to say is: can any body buy me STK4191X and/orSTK4231X as I have never seen any one was able to find it

Thanks in advance

Tekko · 13th July 2005, 01:13 PM

I measured the silicon die on both modules and they are as good as same size.

How can you know that the 407-050 was made for rack stuff ? Perhaps you have a datasheet ?

The STK407-050 requires less components than the STK4151V, as well as smaller physical size so it should be even more space saving :P About the thermal sensor on the 050, what should it be, a thermistor or a diode, or is it even a output for a external thermal protect circuit ?

13th July 2005, 12:00 PM	#1
Tekko diyAudio Member Join Date: Jan 2005	Comparison between STK modules I took liberty to open a STK4151V module to find out it has bigger cooling blocks than the 407-050. The STK4151V is 0.08% THD and the other is probobly 0.1-1% THD. Both are specced 30W min. Heres a pic:

13th July 2005, 01:01 PM	#2
metal diyAudio Member Join Date: Jan 2004	Hello Thats not a problem Aother thing to mention, THD has nothing to do with the sizes of output power transistors, as you can see from the picture you have taken, the substrate is smaller for STK407-050, while for STK4151V is larger, so it makes sense to be smaller for STK407-050. Also you have to note that STK407-050 are designed for small rack stuff, I mean where space is not helping. Last thing to say is: can any body buy me STK4191X and/orSTK4231X as I have never seen any one was able to find it Thanks in advance __________________ any way, finally...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: UCD400 or 180 modules. OR, some SKA Modules	Spiritzly	Swap Meet	0	27th September 2008 07:08 AM
Another cap comparison	Conrad Hoffman	Parts	57	29th May 2007 10:38 PM
TX9 Comparison	dirtyk777	Subwoofers	0	15th March 2007 03:57 AM
UcD modules - can the modules work without the input op-amp?	beppe61	Class D	8	11th October 2006 07:35 AM
AB comparison	Raka	Chip Amps	124	27th June 2003 09:06 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th July 2005, 01:13 PM	#3
Tekko diyAudio Member Join Date: Jan 2005	I measured the silicon die on both modules and they are as good as same size. How can you know that the 407-050 was made for rack stuff ? Perhaps you have a datasheet ? The STK407-050 requires less components than the STK4151V, as well as smaller physical size so it should be even more space saving :P About the thermal sensor on the 050, what should it be, a thermistor or a diode, or is it even a output for a external thermal protect circuit ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)